2020 MacBook Air Reviews Praise Magic Keyboard and Faster Performance at Lower $999 Starting Price - MacRumors | Canada News Media
Connect with us

Tech

2020 MacBook Air Reviews Praise Magic Keyboard and Faster Performance at Lower $999 Starting Price – MacRumors

Published

 on


The media has got its hands on the new MacBook Air and first impressions of the notebook after a day or two of usage are largely positive.

Following in the footsteps of the 16-inch MacBook Pro, the new MacBook Air features a redesigned Magic Keyboard with scissor switches that deliver 1mm of key travel for a comfortable and stable key feel. As with the 16-inch MacBook Pro, reviews find the keyboard on the new MacBook Air to be far better than the problematic butterfly keyboard of recent years.


TechCrunch‘s Brian Heater:

Unlike other iterative attempts to update the butterfly mechanism, the move back to a scissor switch is a marked improvement. The keys are still relatively soft compared to other systems, but the feel is much improved — not to mention not as loud while typing. The feeling here is pretty similar to what you get with Apple’s Bluetooth Magic Keyboard peripheral. Honestly, that makes it a valuable upgrade in and of itself.

CNBC‘s Todd Haselton said “I’m pleased to report that the new keyboard is a vast improvement.”

Engadget‘s Dana Wollman went as far as putting “buy it for the keyboard” in the title of her piece.

Apple significantly redesigned the MacBook Air in 2018, but it also increased the base price of the notebook from $999 to $1,199. Fortunately, the 2020 base model not only starts at $999 again, but also comes with a doubled 256GB of storage. Writing for Six Colors, Jason Snell said this price “finally sets the bar at the right place.”

One caveat of the new $999 base model is that it is equipped with a 1.1GHz dual-core Core i3 chip, but it is a newer 10th-generation Intel processor. Apple told CNBC‘s Todd Haselton that the Core i3 chip is a “big upgrade” from the 8th-generation 1.6GHz dual-core Core i5 chip in the base model 2018 MacBook Air.

Still, many reviews recommend spending an extra $100 to upgrade to a 1.1GHz quad-core Core i5 chip — the first quad-core MacBook Air configuration ever.

One criticism that Haselton offered is that the new MacBook Air continues to have a 720p webcam, with many customers wishing that Apple would offer a 1080p front-facing FaceTime camera on its notebooks.

More first impressions were shared by CNET‘s Dan Ackerman, Business Insider‘s Lisa Eadicicco, TechRadar‘s Gareth Beavis and Matt Hanson, PCMag‘s Tom Brant, Pocket-lint‘s Stuart Miles, and the Daily Express‘ David Snelling.

Video Impressions and Unboxings

Let’s block ads! (Why?)



Source link

Continue Reading

News

Kuwait bans ‘Call of Duty: Black Ops 6’ video game, likely over it featuring Saddam Hussein in 1990s

Published

 on

 

DUBAI, United Arab Emirates (AP) — The tiny Mideast nation of Kuwait has banned the release of the video game “Call of Duty: Black Ops 6,” which features the late Iraqi dictator Saddam Hussein and is set in part in the 1990s Gulf War.

Kuwait has not publicly acknowledged banning the game, which is a tentpole product for the Microsoft-owned developer Activision and is set to be released on Friday worldwide. However, it comes as Kuwait still wrestles with the aftermath of the invasion and as video game makers more broadly deal with addressing historical and cultural issues in their work.

The video game, a first-person shooter, follows CIA operators fighting at times in the United States and also in the Middle East. Game-play trailers for the game show burning oilfields, a painful reminder for Kuwaitis who saw Iraqis set fire to the fields, causing vast ecological and economic damage. Iraqi troops damaged or set fire to over 700 wells.

There also are images of Saddam and Iraq’s old three-star flag in the footage released by developers ahead of the game’s launch. The game’s multiplayer section, a popular feature of the series, includes what appears to be a desert shootout in Kuwait called Scud after the Soviet missiles Saddam fired in the war. Another is called Babylon, after the ancient city in Iraq.

Activision acknowledged in a statement that the game “has not been approved for release in Kuwait,” but did not elaborate.

“All pre-orders in Kuwait will be cancelled and refunded to the original point of purchase,” the company said. “We remain hopeful that local authorities will reconsider, and allow players in Kuwait to enjoy this all-new experience in the Black Ops series.”

Kuwait’s Media Ministry did not respond to requests for comment from The Associated Press over the decision.

“Call of Duty,” which first began in 2003 as a first-person shooter set in World War II, has expanded into an empire worth billions of dollars now owned by Microsoft. But it also has been controversial as its gameplay entered the realm of geopolitics. China and Russia both banned chapters in the franchise. In 2009, an entry in the gaming franchise allowed players to take part in a militant attack at a Russian airport, killing civilians.

But there have been other games recently that won praise for their handling of the Mideast. Ubisoft’s “Assassin’s Creed: Mirage” published last year won praise for its portrayal of Baghdad during the Islamic Golden Age in the 9th century.

The Canadian Press. All rights reserved.

Source link

Continue Reading

Tech

Building Homes Faster with our Latest 3D Construction Printer

Published

 on

Copenhagen, 22.10.2024 – COBOD International, the global leader in 3D construction printing technology, proudly introduces the BOD3 3D Construction Printer for 3D printing of real concrete. Equipped with an extendable ground-based track system, the BOD3 advances the construction process by eliminating printer downtime between multiple buildings on the same site, setting a new benchmark for productivity and efficiency. The BOD3 is the most advanced solution for high-volume low-rise construction and a very effective alternative to conventional construction methods.

The heart and key feature of the new BOD3 3D printer is the advanced extendable ground-based track system. This system enables limitless extension along the Y-axes (length), expanding the printable area to cover 2 or 3 buildings, and reducing setup time to a single installation for multi-building projects. It’s a game-changer, allowing continuous, uninterrupted printing across large sites, increasing efficiency for high volume and mass production at an unmatchable scale.

 

Render of COBOD BOD3 3D Construction Printer.

The BOD3, COBOD’s third printer model, is the outstanding achievement of years of dedicated research, development, and close collaboration with customers. It is a vital advancement in automated construction technology, directly addressing the urgent global demand for faster, smarter, more efficient and sustainable building solutions. Like every COBOD 3D printer, the BOD3’s modular design offers customization, allowing it to easily adapt to any customer’s size wishes in addition to complying with the various sizes of construction sites anywhere in the world.

The BOD3 follows COBOD’s vision to build smarter through automation. Its operational stand combines the control and monitoring of both the 3D printer and supplementary equipment in one user-friendly system. The Advanced Hose Management System (AHMS) transports 3D printable material from the materials delivery system to the printhead via hoses secured within E-chains, minimizing physical labor and optimizing material flow. With the addition of the dual dosing system for additives, operators can better control the concrete and adapt it to onsite environmental conditions. By introducing additives directly at the printhead, the system reduces drying time between layers, speeding up the overall construction process. Designed for easy operation and precision, the BOD3 can be operated by a small, trained, and certified team, reducing the costs of projects.

Incorporating the innovative Universal X-Carriage, the BOD3 is ready for future COBOD advancements and technologies, like the introduction of additional tools for the printer aimed at insulating, painting, sanding, etc. This ensures long-term versatility and performance that will keep the BOD3 at the forefront of the industry for years to come.

 

Universal X-Carriage with Printhead.

Already deployed to the global market, the BOD3 is currently active in Indonesia, by Modula Tiga Dimensi, Angola, by Power2Build, and Bahrain, by Ab’aad 3D. The customers report faster project execution with near-zero downtime between individual buildings on the same site. The projects showcase the BOD3’s ability to speed up construction and print with real concrete, with 99% locally sourced materials and 1% of innovative D.fab, a co-developed solution by COBOD and Cemex to make concrete 3D printable.

Henrik Lund-Nielsen, Founder and General Manager of COBOD, commented on the BOD3: “The global housing crisis demands a more efficient construction solution that is faster, more efficient, and scalable. The BOD3 is our answer to this challenge. Drawing on years of research and expertise, we’ve designed the BOD3 with innovative features, making it our most cost-effective and efficient model yet for multiple low-rise buildings. Its design supports high-volume, linear production of houses, enabling mass production without compromising quality. The fact that six units have already been sold before its official launch speaks volumes about the BOD3’s market demand and the trust our customers place in our technology.

Michael Holm, Chief Innovation Officer at COBOD, states, “The advanced ground-based track system was developed as a response to our customers’ needs to increase efficiency and productivity. Now the 3D construction printer can be easily extended, and multiple consecutive structures can be printed with minimal repositioning and zero downtime between projects, making 3D construction printing more efficient than ever before.

 

The BOD3 is now available for purchase worldwide; for more information, please visit our website, www.cobod.com, or contact us at info@cobod.com.

 

RELEVANT LINKS

 

ABOUT COBOD

COBOD stands as the global leader in supplying 3D printers for the construction sector, with over 80 printers distributed across North and Latin America, Europe, the Middle East, Africa, and Asia-Pacific. Driven by a mission to revolutionize construction through multifunctional robots based on 3D printing, COBOD envisions automating half of the construction processes to achieve faster, cost-effective, sustainable results with enhanced design versatility.

From residential, commercial, and public buildings, COBOD’s 3D printers have been instrumental in erecting 1- to 3-story structures across all six inhabited continents. The innovative technology also extends to fabricate large-scale data centers, wind turbine towers, tanks, and more.

Embracing an open-source material approach, COBOD collaborates with global partners, including customers, academia, and suppliers. The company, backed by prominent shareholders such as General Electric, CEMEX, Holcim, and PERI, operates from its main office in Copenhagen, Denmark, and regional competence centers in Miami, Florida, and Kuala Lumpur, Malaysia. COBOD’s dynamic team comprises over 100 professionals from 25 diverse nationalities.

 

ABOUT MODULA TIGA DIMENSI

PT Modula Tiga Dimensi is a joint venture between Bakrie & Brothers (BNBR) and COBOD. BNBR focuses on offering and providing solutions for housing backlog problems currently encountered by the country.

Teaming up with COBOD International, the company is now set to adopt the latest 3D printing construction technology and is ready to offer the Indonesian market a new and better solution to housing obstructions.

 

ABOUT POWER2BUILD
Reshaping the construction sector and adapting it to urgent human needs.

Power2Build is a technology company for the construction industry, prepared to establish partnerships with private, public, and non-governmental organizations (NGOs) so that they can make the transition to Build 4.0 through 3DCP.

We offer our clients value-added services and high-quality projects, always with a multidisciplinary approach that brings together the necessary experience to deal with complex issues.

Continue Reading

Tech

Slack researcher discusses the fear, loathing and excitement surrounding AI in the workplace

Published

 on

 

SAN FRANCISCO (AP) — Artificial intelligence‘s recent rise to the forefront of business has left most office workers wondering how often they should use the technology and whether a computer will eventually replace them.

Those were among the highlights of a recent study conducted by the workplace communications platform Slack. After conducting in-depth interviews with 5,000 desktop workers, Slack concluded there are five types of AI personalities in the workplace: “The Maximalist” who regularly uses AI on their jobs; “The Underground” who covertly uses AI; “The Rebel,” who abhors AI; “The Superfan” who is excited about AI but still hasn’t used it; and “The Observer” who is taking a wait-and-see approach.

Only 50% of the respondents fell under the Maximalist or Underground categories, posing a challenge for businesses that want their workers to embrace AI technology. The Associated Press recently discussed the excitement and tension surrounding AI at work with Christina Janzer, Slack’s senior vice president of research and analytics.

Q: What do you make about the wide range of perceptions about AI at work?

A: It shows people are experiencing AI in very different ways, so they have very different emotions about it. Understanding those emotions will help understand what is going to drive usage of AI. If people are feeling guilty or nervous about it, they are not going to use it. So we have to understand where people are, then point them toward learning to value this new technology.

Q: The Maximalist and The Underground both seem to be early adopters of AI at work, but what is different about their attitudes?

A: Maximalists are all in on AI. They are getting value out of it, they are excited about it, and they are actively sharing that they are using it, which is a really big driver for usage among others.

The Underground is the one that is really interesting to me because they are using it, but they are hiding it. There are different reasons for that. They are worried they are going to be seen as incompetent. They are worried that AI is going to be seen as cheating. And so with them, we have an opportunity to provide clear guidelines to help them know that AI usage is celebrated and encouraged. But right now they don’t have guidelines from their companies and they don’t feel particularly encouraged to use it.

Overall, there is more excitement about AI than not, so I think that’s great We just need to figure out how to harness that.

Q: What about the 19% of workers who fell under the Rebel description in Slack’s study?

A: Rebels tend to be women, which is really interesting. Three out of five rebels are women, which I obviously don’t like to see. Also, rebels tend to be older. At a high level, men are adopting the technology at higher rates than women.

Q: Why do you think more women than men are resisting AI?

A: Women are more likely to see AI as a threat, more likely to worry that AI is going to take over their jobs. To me, that points to women not feeling as trusted in the workplace as men do. If you feel trusted by your manager, you are more likely to experiment with AI. Women are reluctant to adopt a technology that might be seen as a replacement for them whereas men may have more confidence that isn’t going to happen because they feel more trusted.

Q: What are some of the things employers should be doing if they want their workers to embrace AI on the job?

A: We are seeing three out of five desk workers don’t even have clear guidelines with AI, because their companies just aren’t telling them anything, so that’s a huge opportunity.

Another opportunity to encourage AI usage in the open. If we can create a culture where it’s celebrated, where people can see the way people are using it, then they can know that it’s accepted and celebrated. Then they can be inspired.

The third thing is we have to create a culture of experimentation where people feel comfortable trying it out, testing it, getting comfortable with it because a lot of people just don’t know where to start. The reality is you can start small, you don’t have to completely change your job. Having AI write an email or summarize content is a great place to start so you can start to understand what this technology can do.

Q: Do you think the fears about people losing their jobs because of AI are warranted?

A: People with AI are going to replace people without AI.

The Canadian Press. All rights reserved.

Source link

Continue Reading

Trending

Exit mobile version