Apple Inc. has asked suppliers to build as many as 90 million next-generation iPhones this year, a sharp increase from its 2020 iPhone shipments, according to people with knowledge of the matter.
The Cupertino, California-based tech giant has maintained a consistent level in recent years of roughly 75 million units for the initial run from a device’s launch through the end of the year. The upgraded forecast for 2021 would suggest the company anticipates its first iPhone launch since the rollout of COVID-19 vaccines will unlock additional demand. The next iPhones will be Apple’s second with 5G, a key enticement pushing users to upgrade.
This year’s update will be more incremental than last year’s iPhone 12, emphasizing processor, camera and display improvements, the people said, asking not to be named as the plans are not public. Apple is planning updates to all of the current models, spanning the 5.4-inch and 6.1-inch regular versions and the 6.1-inch and 6.7-inch Pro models. The phones, codenamed D16, D17, D63, and D64, are all expected to be announced in September, earlier than last year’s October introduction partly thanks to the supply chain recovering.
At least one of the new versions will have an LTPO (low-temperature polycrystalline oxide) display capable of alternating its refresh rate based on the content being shown. Apple has used this technology in the Apple Watch for several years, allowing the screen to be slower in certain situations — such as the Always On mode — to extend battery life. Oppo, OnePlus and Samsung Electronics Co. already have LTPO screens in their flagship phones. The new iPhones with LTPO displays will also use IGZO (indium gallium zinc oxide) technology for improved power efficiency and responsiveness.
While the design of the new Apple phones will remain largely unchanged, the company plans to reduce the size of the front-facing camera and face unlock sensor cutout, or notch, to better match its rivals. The company hopes to eventually remove the notch entirely in a future version of the iPhone and is likely to shrink its size further next year.
An Apple spokesperson declined to comment.
Apple’s camera upgrades will put the focus on more advanced video recording features such as improved optical zoom. An upgraded system-on-chip, built around the same six cores as the current A14 chip, will also be included. The company has tested an in-display fingerprint scanner for this year’s devices, however that feature will likely not appear on this generation.
What Bloomberg Intelligence Says
Apple’s building on strong momentum from the iPhone 12 release in 2020 and may continue to benefit from 5G smartphone upgrades and an overall improved smartphone market to follow that up with another strong release. Still, the growth expected in the initial production ramp is skewed by the fact that the iPhone 12 released later than normal in 2020, while the next iPhone is expected back to the normal late September release window.
— Matthew Kanterman, analyst
While Apple has asked suppliers to build up to 90 million units, the actual number could be a few million units shy of that target, one of the people said. Huawei Technologies Co.’s sanction-stricken smartphone business is a major factor for Apple’s increased shipment orders, according to another person familiar with the strategy.
The ongoing chip shortage that has undermined operations across several global industries is not expected to affect the production of upcoming iPhones, some of the people said. Apple is key chipmaker Taiwan Semiconductor Manufacturing Co.’s biggest customer and its outsize orders make the launch of a new iPhone an annual event that suppliers across Asia plan for months in advance.
TSMC shares rose as much as 1.3 per cent after the report of Apple’s upgraded output plans. Among other supply partners, fellow Taiwanese connector and power-pack maker Cheng Uei Precision Industry Co. climbed as much as 9 per cent and lens maker Largan Precision Co. was up as much as 2.4 per cent. Japanese electronic component makers Alps Alpine Co., up as much as 3.5 per cent, and Renesas Electronics Corp., rising as much as 2.6 per cent, were also positively affected. Apple profit estimates were raised at Citigroup.
Chinese assembly partner Luxshare Precision Industry Co. is set to have a bigger role this year after it acquired iPhone assembly facilities from Wistron Corp.
Assembler Hon Hai Precision Industry Co. will dominate orders for the 6.7-inch Pro Max model and split the 6.1-inch Pro with Luxshare and the 6.1-inch regular iPhone with Pegatron Corp. Pegatron is expected to make all the 5.4-inch units.
Beyond the new iPhones, Apple is preparing several other products for later this year, including new MacBook Pro laptops with custom Apple chips, redesigned iPad mini and entry-tier iPad models and Apple Watches with updated displays. Apple plans to kick off production of the new MacBook Pro in the third quarter after facing some issues related to MiniLED screens that also challenged the launch of the latest iPad Pro.
To resolve the MiniLED supply issue, Apple has recruited Luxshare to split orders for an essential MiniLED component for the new MacBook Pro with Taiwan Surface Mounting Technology Corp., which earlier dominated the orders for the component for iPad Pro.
DUBAI, United Arab Emirates (AP) — The tiny Mideast nation of Kuwait has banned the release of the video game “Call of Duty: Black Ops 6,” which features the late Iraqi dictator Saddam Hussein and is set in part in the 1990s Gulf War.
The video game, a first-person shooter, follows CIA operators fighting at times in the United States and also in the Middle East. Game-play trailers for the game show burning oilfields, a painful reminder for Kuwaitis who saw Iraqis set fire to the fields, causing vast ecological and economic damage. Iraqi troops damaged or set fire to over 700 wells.
There also are images of Saddam and Iraq’s old three-star flag in the footage released by developers ahead of the game’s launch. The game’s multiplayer section, a popular feature of the series, includes what appears to be a desert shootout in Kuwait called Scud after the Soviet missiles Saddam fired in the war. Another is called Babylon, after the ancient city in Iraq.
Activision acknowledged in a statement that the game “has not been approved for release in Kuwait,” but did not elaborate.
“All pre-orders in Kuwait will be cancelled and refunded to the original point of purchase,” the company said. “We remain hopeful that local authorities will reconsider, and allow players in Kuwait to enjoy this all-new experience in the Black Ops series.”
Kuwait’s Media Ministry did not respond to requests for comment from The Associated Press over the decision.
“Call of Duty,” which first began in 2003 as a first-person shooter set in World War II, has expanded into an empire worth billions of dollars now owned by Microsoft. But it also has been controversial as its gameplay entered the realm of geopolitics. China and Russia both banned chapters in the franchise. In 2009, an entry in the gaming franchise allowed players to take part in a militant attack at a Russian airport, killing civilians.
But there have been other games recently that won praise for their handling of the Mideast. Ubisoft’s “Assassin’s Creed: Mirage” published last year won praise for its portrayal of Baghdad during the Islamic Golden Age in the 9th century.
Copenhagen, 22.10.2024 – COBOD International, the global leader in 3D construction printing technology, proudly introduces the BOD3 3D Construction Printer for 3D printing of real concrete. Equipped with an extendable ground-based track system, the BOD3 advances the construction process by eliminating printer downtime between multiple buildings on the same site, setting anew benchmark for productivity and efficiency. The BOD3 is the most advanced solution for high-volume low-rise construction and a very effective alternative to conventional construction methods.
The heart and key feature of the new BOD3 3D printer is the advanced extendable ground-based track system. This system enables limitless extension along the Y-axes (length), expanding the printable area to cover 2 or 3 buildings, and reducing setup time to a single installation for multi-building projects. It’s a game-changer, allowing continuous, uninterrupted printing across large sites, increasing efficiency for high volume and mass production at an unmatchable scale.
Render of COBOD BOD3 3D Construction Printer.
The BOD3, COBOD’s third printer model, is the outstanding achievement of years of dedicated research, development, and close collaboration with customers. It is a vital advancement in automated construction technology, directly addressing the urgent global demand for faster, smarter, more efficient and sustainable building solutions. Like every COBOD 3D printer, the BOD3’s modular design offers customization, allowing it to easily adapt to any customer’s size wishes in addition to complying with the various sizes of construction sites anywhere in the world.
The BOD3 follows COBOD’s vision to build smarter through automation. Its operational stand combines the control and monitoring of both the 3D printer and supplementary equipment in one user-friendly system. The Advanced Hose Management System (AHMS) transports 3D printable material from the materials delivery system to the printhead via hoses secured within E-chains, minimizing physical labor and optimizing material flow. With the addition of the dual dosing system for additives, operators can better control the concrete and adapt it to onsite environmental conditions. By introducing additives directly at the printhead, the system reduces drying time between layers, speeding up the overall construction process. Designed for easy operation and precision, the BOD3 can be operated by a small, trained, and certified team, reducing the costs of projects.
Incorporating the innovative Universal X-Carriage, the BOD3 is ready for future COBOD advancements and technologies, like the introduction of additional tools for the printer aimed at insulating, painting, sanding, etc. This ensures long-term versatility and performance that will keep the BOD3 at the forefront of the industry for years to come.
Universal X-Carriage with Printhead.
Already deployed to the global market, the BOD3 is currently active in Indonesia, by Modula Tiga Dimensi, Angola, by Power2Build, andBahrain, by Ab’aad 3D. The customers report faster project execution with near-zero downtime between individual buildings on the same site. The projects showcase the BOD3’s ability to speed up construction and print with real concrete, with 99% locally sourced materials and 1% of innovative D.fab, a co-developed solution by COBOD and Cemex to make concrete 3D printable.
Henrik Lund-Nielsen, Founder and General Manager of COBOD, commented on the BOD3: “The global housing crisis demands a more efficient construction solution that is faster, more efficient, and scalable. The BOD3 is our answer to this challenge. Drawing on years of research and expertise, we’ve designed the BOD3 with innovative features, making it our most cost-effective and efficient model yet for multiple low-rise buildings. Its design supports high-volume, linear production of houses, enabling mass production without compromising quality. The fact that six units have already been sold before its official launch speaks volumes about the BOD3’s market demand and the trust our customers place in our technology.”
Michael Holm, Chief Innovation Officer at COBOD, states, “The advanced ground-based track system was developed as a response to our customers’ needs to increase efficiency and productivity. Now the 3D construction printer can be easily extended, and multiple consecutive structures can be printed with minimal repositioning and zero downtime between projects, making 3D construction printing more efficient than ever before.”
The BOD3 is now available for purchase worldwide; for more information, please visit our website, www.cobod.com, or contact us at info@cobod.com.
COBOD stands as the global leader in supplying 3D printers for the construction sector, with over 80 printers distributed across North and Latin America, Europe, the Middle East, Africa, and Asia-Pacific. Driven by a mission to revolutionize construction through multifunctional robots based on 3D printing, COBOD envisions automating half of the construction processes to achieve faster, cost-effective, sustainable results with enhanced design versatility.
From residential, commercial, and public buildings, COBOD’s 3D printers have been instrumental in erecting 1- to 3-story structures across all six inhabited continents. The innovative technology also extends to fabricate large-scale data centers, wind turbine towers, tanks, and more.
Embracing an open-source material approach, COBOD collaborates with global partners, including customers, academia, and suppliers. The company, backed by prominent shareholders such as General Electric, CEMEX, Holcim, and PERI, operates from its main office in Copenhagen, Denmark, and regional competence centers in Miami, Florida, and Kuala Lumpur, Malaysia. COBOD’s dynamic team comprises over 100 professionals from 25 diverse nationalities.
ABOUT MODULA TIGA DIMENSI
PT Modula Tiga Dimensi is a joint venture between Bakrie & Brothers (BNBR) and COBOD. BNBR focuses on offering and providing solutions for housing backlog problems currently encountered by the country.
Teaming up with COBOD International, the company is now set to adopt the latest 3D printing construction technology and is ready to offer the Indonesian market a new and better solution to housing obstructions.
ABOUT POWER2BUILD
Reshaping the construction sector and adapting it to urgent human needs.
Power2Build is a technology company for the construction industry, prepared to establish partnerships with private, public, and non-governmental organizations (NGOs) so that they can make the transition to Build 4.0 through 3DCP.
We offer our clients value-added services and high-quality projects, always with a multidisciplinary approach that brings together the necessary experience to deal with complex issues.
SAN FRANCISCO (AP) — Artificial intelligence‘s recent rise to the forefront of business has left most office workers wondering how often they should use the technology and whether a computer will eventually replace them.
Those were among the highlights of a recent study conducted by the workplace communications platform Slack. After conducting in-depth interviews with 5,000 desktop workers, Slack concluded there are five types of AI personalities in the workplace: “The Maximalist” who regularly uses AI on their jobs; “The Underground” who covertly uses AI; “The Rebel,” who abhors AI; “The Superfan” who is excited about AI but still hasn’t used it; and “The Observer” who is taking a wait-and-see approach.
Only 50% of the respondents fell under the Maximalist or Underground categories, posing a challenge for businesses that want their workers to embrace AI technology. The Associated Press recently discussed the excitement and tension surrounding AI at work with Christina Janzer, Slack’s senior vice president of research and analytics.
Q: What do you make about the wide range of perceptions about AI at work?
A: It shows people are experiencing AI in very different ways, so they have very different emotions about it. Understanding those emotions will help understand what is going to drive usage of AI. If people are feeling guilty or nervous about it, they are not going to use it. So we have to understand where people are, then point them toward learning to value this new technology.
Q: The Maximalist and The Underground both seem to be early adopters of AI at work, but what is different about their attitudes?
A: Maximalists are all in on AI. They are getting value out of it, they are excited about it, and they are actively sharing that they are using it, which is a really big driver for usage among others.
The Underground is the one that is really interesting to me because they are using it, but they are hiding it. There are different reasons for that. They are worried they are going to be seen as incompetent. They are worried that AI is going to be seen as cheating. And so with them, we have an opportunity to provide clear guidelines to help them know that AI usage is celebrated and encouraged. But right now they don’t have guidelines from their companies and they don’t feel particularly encouraged to use it.
Overall, there is more excitement about AI than not, so I think that’s great We just need to figure out how to harness that.
Q: What about the 19% of workers who fell under the Rebel description in Slack’s study?
A: Rebels tend to be women, which is really interesting. Three out of five rebels are women, which I obviously don’t like to see. Also, rebels tend to be older. At a high level, men are adopting the technology at higher rates than women.
Q: Why do you think more women than men are resisting AI?
A: Women are more likely to see AI as a threat, more likely to worry that AI is going to take over their jobs. To me, that points to women not feeling as trusted in the workplace as men do. If you feel trusted by your manager, you are more likely to experiment with AI. Women are reluctant to adopt a technology that might be seen as a replacement for them whereas men may have more confidence that isn’t going to happen because they feel more trusted.
Q: What are some of the things employers should be doing if they want their workers to embrace AI on the job?
A: We are seeing three out of five desk workers don’t even have clear guidelines with AI, because their companies just aren’t telling them anything, so that’s a huge opportunity.
Another opportunity to encourage AI usage in the open. If we can create a culture where it’s celebrated, where people can see the way people are using it, then they can know that it’s accepted and celebrated. Then they can be inspired.
The third thing is we have to create a culture of experimentation where people feel comfortable trying it out, testing it, getting comfortable with it because a lot of people just don’t know where to start. The reality is you can start small, you don’t have to completely change your job. Having AI write an email or summarize content is a great place to start so you can start to understand what this technology can do.
Q: Do you think the fears about people losing their jobs because of AI are warranted?
A: People with AI are going to replace people without AI.
