'Cyberpunk 2077' gets another patch to address HDR and V's 'modesty' | Canada News Media
Connect with us

Tech

‘Cyberpunk 2077’ gets another patch to address HDR and V’s ‘modesty’

Published

 on

The Wrap

Is There a New ‘SNL’ Episode Airing This Week?

“SNL” is back, now in its 46th season. The most recent new episode, which aired on December 12, was hosted by Timothee Chalamet, with Bruce Springsteen and the E Street Band as musical guests. The cold open last week saw Kate McKinnon bring out a pretty solid impression of Dr. Fauci as she tried to figure out a way to explain the vaccine in a way that would sound appealing for Americans.Surprisingly, Alec Baldwin, Jim Carrey and  Maya Rudolph all skipped the cold open sketch the last two weeks. Carrey and Rudolph will certainly be back at some point, but Baldwin’s “SNL” future is in doubt with Trump on the way out.This is the fifth season in which Baldwin has Trump. In season 45 he made eight total appearances across the 18 episodes of the shortened season — including in two of the three quarantine episodes.But we probably shouldn’t expect Baldwin to go away completely just yet — since Trump isn’t actually leaving office until January, and he’s continuing to protest his own election failure in the meantime.Also Read: ‘SNL’: Kate McKinnon as Dr. Fauci Explains the Government’s Vaccine Plan (Video)And the good news for those who have enjoyed Carrey as Biden is, well, it looks like we’ll be seeing a lot more of him over the next four years.And the same goes for Maya Rudolph as Kamala Harris this season. The former “SNL” cast member should be around a lot this year, and I think that’s something just about everybody who watches the sketch show can get behind.This week, on Saturday, Dec. 19, there WILL be a new episode of “SNL.” This episode will be hosted by former “SNL” cast member Kristen Wiig, with Dua Lipa as the musical guest. This is the final episode of the show for 2020.This will be the fourth time that Wiig has hosted the show since exiting as a cast member — her last gig came during one of the “SNL At Home” episodes from this past spring.For Dua Lipa, it’ll be her second time as musical guest. Her last appearance was in 2018.Also Read: ‘SNL’: Adele Can’t Stop Cracking Up at Kate McKinnon Saying ‘Tribesmen’ (Video)You can be pretty sure this season of “SNL” be very political for the full stretch. This is an election year, and an impossibly hectic one at that, so it’s been hard for any of us to think about anything other than politics. And, well, not many folks are really expecting things to calm down all that much even now that we’re past Election Day.The premiere episode came out hard with political commentary, with the debate cold open, a very political monologue from Chris Rock, and a stunned discussion of Trump’s COVID-19 infection from Michael Che on Weekend Update.And “SNL” hasn’t slowed down with its political content, with each cold open in season 46 being about the election. After that debate sketch in the premiere, we got two other debate sketches, one for the VP candidates and one other for the presidential candidates, as well as one about the dueling town halls from when Trump was infected with COVID-19 and refused to submit to safety measures.The show’s writers were certainly pleased with the election results as well — the cold open sketch in the episode after Election Day was certainly celebratory. That sketch also parodied the episode after the 2016 election in which Kate McKinnon took the stage as Hillary Clinton and played piano while singing “Hallelujah” — this time, Baldwin, as Trump, performed a mournful version of “Macho Man.”Also Read: ‘SNL’ Cold Open Gives Alec Baldwin’s Trump Town Hall the Wrestlemania Treatment (Video)“SNL” tried to drift away from that political focus during season 44, but certainly didn’t shy away from politics in season 45 — a season in which the actual Elizabeth Warren popped up to play herself in a sketch.The renewed focus on politics in season 45 was not just about mocking Trump, but also lampooning the circus that was the run up to the Democratic primaries. Not that the sketch show has in any way shied away from mocking Trump. The impeachment has certainly been a common topic for cold open sketches this season.There was the one where Baldwin’s Trump went through his contacts list trying to find a fixer who could make the impeachment stop, ending with a call to Liev Schreiber playing himself — Trump thought his character Ray Donovan, a fixer on the eponymous Showtime series, was actually a real person.There was also that one where “SNL” sent up the impeachment hearings by doing a “Days of Our Lives” parody that starred Jon Hamm.As for the madness with the Democratic primary, we had numerous big cameos in the debate sketches in season 45. The show tried out multiple different Joe Bidens last year, with Woody Harrelson taking up the role a couple times and Jason Sudeikis giving it a shot as well.They also brought in many other celebs to play other candidates in the Dem primary, including Lin-Manuel Miranda as Julian Castro, Larry David as Bernie Sanders, Rachel Dratch as Amy Klobuchar, Fred Armisen as Michael Bloomberg, and Will Ferrell as Tom Steyer. Maya Rudolph also played Kamala Harris a few times, and it was only natural that they’d keep her around for season 46.That’s a lot of cameos, and “SNL” actually managed to jam nearly all of those folks into a single sketch — a 12-minute debate parody from a late November episode. Miranda did not appear in that one, but he had previously popped up as Castro in October in a parody of the Democrats’ LGBTQ town hall that was moderated by Billy Porter in character as himself.Read original story Is There a New ‘SNL’ Episode Airing This Week? At TheWrap

Source: – Yahoo Canada Shine On

Source link

Continue Reading

Tech

Building Homes Faster with our Latest 3D Construction Printer

Published

 on

Copenhagen, 22.10.2024 – COBOD International, the global leader in 3D construction printing technology, proudly introduces the BOD3 3D Construction Printer for 3D printing of real concrete. Equipped with an extendable ground-based track system, the BOD3 advances the construction process by eliminating printer downtime between multiple buildings on the same site, setting a new benchmark for productivity and efficiency. The BOD3 is the most advanced solution for high-volume low-rise construction and a very effective alternative to conventional construction methods.

The heart and key feature of the new BOD3 3D printer is the advanced extendable ground-based track system. This system enables limitless extension along the Y-axes (length), expanding the printable area to cover 2 or 3 buildings, and reducing setup time to a single installation for multi-building projects. It’s a game-changer, allowing continuous, uninterrupted printing across large sites, increasing efficiency for high volume and mass production at an unmatchable scale.

 

Render of COBOD BOD3 3D Construction Printer.

The BOD3, COBOD’s third printer model, is the outstanding achievement of years of dedicated research, development, and close collaboration with customers. It is a vital advancement in automated construction technology, directly addressing the urgent global demand for faster, smarter, more efficient and sustainable building solutions. Like every COBOD 3D printer, the BOD3’s modular design offers customization, allowing it to easily adapt to any customer’s size wishes in addition to complying with the various sizes of construction sites anywhere in the world.

The BOD3 follows COBOD’s vision to build smarter through automation. Its operational stand combines the control and monitoring of both the 3D printer and supplementary equipment in one user-friendly system. The Advanced Hose Management System (AHMS) transports 3D printable material from the materials delivery system to the printhead via hoses secured within E-chains, minimizing physical labor and optimizing material flow. With the addition of the dual dosing system for additives, operators can better control the concrete and adapt it to onsite environmental conditions. By introducing additives directly at the printhead, the system reduces drying time between layers, speeding up the overall construction process. Designed for easy operation and precision, the BOD3 can be operated by a small, trained, and certified team, reducing the costs of projects.

Incorporating the innovative Universal X-Carriage, the BOD3 is ready for future COBOD advancements and technologies, like the introduction of additional tools for the printer aimed at insulating, painting, sanding, etc. This ensures long-term versatility and performance that will keep the BOD3 at the forefront of the industry for years to come.

 

Universal X-Carriage with Printhead.

Already deployed to the global market, the BOD3 is currently active in Indonesia, by Modula Tiga Dimensi, Angola, by Power2Build, and Bahrain, by Ab’aad 3D. The customers report faster project execution with near-zero downtime between individual buildings on the same site. The projects showcase the BOD3’s ability to speed up construction and print with real concrete, with 99% locally sourced materials and 1% of innovative D.fab, a co-developed solution by COBOD and Cemex to make concrete 3D printable.

Henrik Lund-Nielsen, Founder and General Manager of COBOD, commented on the BOD3: “The global housing crisis demands a more efficient construction solution that is faster, more efficient, and scalable. The BOD3 is our answer to this challenge. Drawing on years of research and expertise, we’ve designed the BOD3 with innovative features, making it our most cost-effective and efficient model yet for multiple low-rise buildings. Its design supports high-volume, linear production of houses, enabling mass production without compromising quality. The fact that six units have already been sold before its official launch speaks volumes about the BOD3’s market demand and the trust our customers place in our technology.

Michael Holm, Chief Innovation Officer at COBOD, states, “The advanced ground-based track system was developed as a response to our customers’ needs to increase efficiency and productivity. Now the 3D construction printer can be easily extended, and multiple consecutive structures can be printed with minimal repositioning and zero downtime between projects, making 3D construction printing more efficient than ever before.

 

The BOD3 is now available for purchase worldwide; for more information, please visit our website, www.cobod.com, or contact us at info@cobod.com.

 

RELEVANT LINKS

 

ABOUT COBOD

COBOD stands as the global leader in supplying 3D printers for the construction sector, with over 80 printers distributed across North and Latin America, Europe, the Middle East, Africa, and Asia-Pacific. Driven by a mission to revolutionize construction through multifunctional robots based on 3D printing, COBOD envisions automating half of the construction processes to achieve faster, cost-effective, sustainable results with enhanced design versatility.

From residential, commercial, and public buildings, COBOD’s 3D printers have been instrumental in erecting 1- to 3-story structures across all six inhabited continents. The innovative technology also extends to fabricate large-scale data centers, wind turbine towers, tanks, and more.

Embracing an open-source material approach, COBOD collaborates with global partners, including customers, academia, and suppliers. The company, backed by prominent shareholders such as General Electric, CEMEX, Holcim, and PERI, operates from its main office in Copenhagen, Denmark, and regional competence centers in Miami, Florida, and Kuala Lumpur, Malaysia. COBOD’s dynamic team comprises over 100 professionals from 25 diverse nationalities.

 

ABOUT MODULA TIGA DIMENSI

PT Modula Tiga Dimensi is a joint venture between Bakrie & Brothers (BNBR) and COBOD. BNBR focuses on offering and providing solutions for housing backlog problems currently encountered by the country.

Teaming up with COBOD International, the company is now set to adopt the latest 3D printing construction technology and is ready to offer the Indonesian market a new and better solution to housing obstructions.

 

ABOUT POWER2BUILD
Reshaping the construction sector and adapting it to urgent human needs.

Power2Build is a technology company for the construction industry, prepared to establish partnerships with private, public, and non-governmental organizations (NGOs) so that they can make the transition to Build 4.0 through 3DCP.

We offer our clients value-added services and high-quality projects, always with a multidisciplinary approach that brings together the necessary experience to deal with complex issues.

Continue Reading

Tech

Slack researcher discusses the fear, loathing and excitement surrounding AI in the workplace

Published

 on

 

SAN FRANCISCO (AP) — Artificial intelligence‘s recent rise to the forefront of business has left most office workers wondering how often they should use the technology and whether a computer will eventually replace them.

Those were among the highlights of a recent study conducted by the workplace communications platform Slack. After conducting in-depth interviews with 5,000 desktop workers, Slack concluded there are five types of AI personalities in the workplace: “The Maximalist” who regularly uses AI on their jobs; “The Underground” who covertly uses AI; “The Rebel,” who abhors AI; “The Superfan” who is excited about AI but still hasn’t used it; and “The Observer” who is taking a wait-and-see approach.

Only 50% of the respondents fell under the Maximalist or Underground categories, posing a challenge for businesses that want their workers to embrace AI technology. The Associated Press recently discussed the excitement and tension surrounding AI at work with Christina Janzer, Slack’s senior vice president of research and analytics.

Q: What do you make about the wide range of perceptions about AI at work?

A: It shows people are experiencing AI in very different ways, so they have very different emotions about it. Understanding those emotions will help understand what is going to drive usage of AI. If people are feeling guilty or nervous about it, they are not going to use it. So we have to understand where people are, then point them toward learning to value this new technology.

Q: The Maximalist and The Underground both seem to be early adopters of AI at work, but what is different about their attitudes?

A: Maximalists are all in on AI. They are getting value out of it, they are excited about it, and they are actively sharing that they are using it, which is a really big driver for usage among others.

The Underground is the one that is really interesting to me because they are using it, but they are hiding it. There are different reasons for that. They are worried they are going to be seen as incompetent. They are worried that AI is going to be seen as cheating. And so with them, we have an opportunity to provide clear guidelines to help them know that AI usage is celebrated and encouraged. But right now they don’t have guidelines from their companies and they don’t feel particularly encouraged to use it.

Overall, there is more excitement about AI than not, so I think that’s great We just need to figure out how to harness that.

Q: What about the 19% of workers who fell under the Rebel description in Slack’s study?

A: Rebels tend to be women, which is really interesting. Three out of five rebels are women, which I obviously don’t like to see. Also, rebels tend to be older. At a high level, men are adopting the technology at higher rates than women.

Q: Why do you think more women than men are resisting AI?

A: Women are more likely to see AI as a threat, more likely to worry that AI is going to take over their jobs. To me, that points to women not feeling as trusted in the workplace as men do. If you feel trusted by your manager, you are more likely to experiment with AI. Women are reluctant to adopt a technology that might be seen as a replacement for them whereas men may have more confidence that isn’t going to happen because they feel more trusted.

Q: What are some of the things employers should be doing if they want their workers to embrace AI on the job?

A: We are seeing three out of five desk workers don’t even have clear guidelines with AI, because their companies just aren’t telling them anything, so that’s a huge opportunity.

Another opportunity to encourage AI usage in the open. If we can create a culture where it’s celebrated, where people can see the way people are using it, then they can know that it’s accepted and celebrated. Then they can be inspired.

The third thing is we have to create a culture of experimentation where people feel comfortable trying it out, testing it, getting comfortable with it because a lot of people just don’t know where to start. The reality is you can start small, you don’t have to completely change your job. Having AI write an email or summarize content is a great place to start so you can start to understand what this technology can do.

Q: Do you think the fears about people losing their jobs because of AI are warranted?

A: People with AI are going to replace people without AI.

The Canadian Press. All rights reserved.

Source link

Continue Reading

Tech

Biden administration to provide $325 million for new Michigan semiconductor factory

Published

 on

 

WASHINGTON (AP) — The Biden administration said Tuesday that it would provide up to $325 million to Hemlock Semiconductor for a new factory, a move that could help give Democrats a political edge in the swing state of Michigan ahead of election day.

The funding would support 180 manufacturing jobs in Saginaw County, where Republicans and Democrats were neck-in-neck for the past two presidential elections. There would also be construction jobs tied to the factory that would produce hyper-pure polysilicon, a building block for electronics and solar panels, among other technologies.

Commerce Secretary Gina Raimondo said on a call with reporters that the funding came from the CHIPS and Science Act, which President Joe Biden signed into law in 2022. It’s part of a broader industrial strategy that the campaign of Vice President Kamala Harris, the Democratic nominee, supports, while Republican nominee Donald Trump, the former president, sees tariff hikes and income tax cuts as better to support manufacturing.

“What we’ve been able to do with the CHIPS Act is not just build a few new factories, but fundamentally revitalize the semiconductor ecosystem in our country with American workers,” Raimondo said. “All of this is because of the vision of the Biden-Harris administration.”

A senior administration official said the timing of the announcement reflected the negotiating process for reaching terms on the grant, rather than any political considerations. The official insisted on anonymity to discuss the process.

After site work, Hemlock Semiconductor plans to begin construction in 2026 and then start production in 2028, the official said.

Running in 2016, Trump narrowly won Saginaw County and Michigan as a whole. But in 2020 against Biden, both Saginaw County and Michigan flipped to the Democrats.

The Canadian Press. All rights reserved.

Source link

Continue Reading

Trending

Exit mobile version