Fortnite developer buys $95 million shopping mall for headquarters - Yahoo Canada Sports | Canada News Media
Connect with us

Tech

Fortnite developer buys $95 million shopping mall for headquarters – Yahoo Canada Sports

Published

 on


The Canadian Press

Vikings enter off-season with deteriorated defence to repair

MINNEAPOLIS — The Minnesota Vikings missed the playoffs by one game in a season with two losses by one point and two other one-score defeats.This finish, though, was hardly a close call.The prevailing feeling from the Vikings in bidding a not-so-fond farewell to 2020 was a full realization they weren’t good enough to keep playing even with the NFL’s addition of a third wild-card spot. Their recovery from a 1-5 start to stay in contention until the second-to-last week was admirable, but all the Vikings had to show for their final six games were three wins against bottom-eight teams in the league — by a total of six points.“We’ve got a lot of work to do. I’ve got a lot of work to do,” said coach Mike Zimmer, whose seventh-year record was the same as his first: 7-9.In a not-so-subtle pitch to stay on the job, Zimmer concluded his postgame video conference with reporters on Sunday with a reminder of how inexperience and injuries had ravaged his defence.“Under the circumstances and everything that went on, maybe it’s the best we could have done,” said Zimmer, who received a three-year contract extension prior to the season.The stumble on defence was traceable back to pre-pandemic times when cornerback Xavier Rhodes and nose tackle Linval Joseph were released for badly needed salary-cap space. Minnesota’s top free-agent signing, nose tackle Michael Pierce, opted out of the season with COVID-19 health concerns. Defensive end Danielle Hunter needed neck surgery and never played a down. Linebacker Anthony Barr tore a pectoral muscle in the second game and was lost for the year.Barr, Hunter, Joseph and Rhodes have a combined 11 Pro Bowl selections. Their replacements either weren’t ready or weren’t capable. Zimmer, who has coached in the NFL for 27 seasons, went so far as to declare this the worst defence he’s ever had.The Vikings gave up the third-most points (475) in their 60-year history and were fourth-to-last in the league with an average of 29.7 points allowed per game. Last season, they were fifth-best in that category. The damage would’ve been worse had it not been for a goal-to-go touchdown allowance rate of 65.9% that was the third-best in the NFL.“The greats, regardless of what the situation is, they know how to adapt. At the end of the day, if you don’t have the ideal guys in there, you make do with what you’ve got,” defensive end Ifaedi Odenigbo said.NO PRESSUREThere was no more damning evidence of the deteriorated defence than the pass rush. Defensive end Yannick Ngakoue, who played in only six games before being traded to Baltimore, still led the team with five sacks. The Vikings had 23 sacks for the season, just one more than Jared Allen’s individual franchise record from 2011 and their fewest since the NFL began recognizing sacks as an official statistic in 1982. The only other time in their history the Vikings had a lower total was in 1961 as an expansion club with 16 sacks in 14 games.MORE SHUFFLINGThe starting defensive line of Odenigbo, Shamar Stephen, Jaleel Johnson and Jalyn Holmes could all wind up being replaced. Defensive end D.J. Wonnum, one of eight rookies who had playing time on defence this year, flashed some potential with three sacks.Safety Anthony Harris is the most prominent player with an expiring contact, with linebacker Eric Wilson set up for a big payday in free agency after deftly filling in for Barr. Cap-space casualty candidates include Barr, tight end Kyle Rudolph and left tackle Riley Reiff.ON THE BRIGHTER SIDEThe offence, meanwhile, produced the third-highest scoring season in team history with 430 points, trailing the NFC runner-up teams from 1998 and 2009. The Vikings set a franchise record with 383 first downs and were fifth in the league in yards per play.Justin Jefferson set the NFL rookie record with 1,400 receiving yards. Dalvin Cook, despite missing two games, had the second-most yards from scrimmage (1,912) in Vikings history.“It’s nice to have positive statistics, but ultimately that’s not what it’s really about,” quarterback Kirk Cousins said. “You want to win games, and that’s where my focus is.”CONFIDENCE IN COUSINS?The rash of interceptions from Cousins was a significant factor in the team’s rough start, but his performance after the bye was largely stellar with a 113.2 passer rating over the final 10 games.Cousins built on his first career win in the playoffs last season with more late-game success, yet still left the Vikings needing more out of crucial moments in a handful of narrow losses. For all the production by the offence, there were nagging failures on short-yardage plays and in hurry-up situations. Though he posted a career-high 35 touchdown passes, the second-most in Vikings history, Cousins still carries a 51-51-2 record as a starter in the regular season.“Week in and week out, it was a different reason each time we lost,” Cousins said, adding: “If you had not had those turnovers earlier in the year, maybe you don’t start 1-5.”KICKING THEMSELVESSpecial teams failures abounded, from the returners to the coverage units to the long snapping to the punting, but the most glaring trouble developed with kicker Dan Bailey. His field-goal percentage ranked second-to-last in the league, and he was last in extra-point percentage.“You’ve got to go out there and do your job,” Bailey said, “and if you don’t do it to the standard that’s needed, there are plenty of other people out there on the street or on a practice squad somewhere that are champing at the bit to get an opportunity.” ___More AP NFL coverage: https://apnews.com/NFL and https://twitter.com/AP_NFLDave Campbell, The Associated Press

Let’s block ads! (Why?)



Source link

Continue Reading

Tech

Building Homes Faster with our Latest 3D Construction Printer

Published

 on

Copenhagen, 22.10.2024 – COBOD International, the global leader in 3D construction printing technology, proudly introduces the BOD3 3D Construction Printer for 3D printing of real concrete. Equipped with an extendable ground-based track system, the BOD3 advances the construction process by eliminating printer downtime between multiple buildings on the same site, setting a new benchmark for productivity and efficiency. The BOD3 is the most advanced solution for high-volume low-rise construction and a very effective alternative to conventional construction methods.

The heart and key feature of the new BOD3 3D printer is the advanced extendable ground-based track system. This system enables limitless extension along the Y-axes (length), expanding the printable area to cover 2 or 3 buildings, and reducing setup time to a single installation for multi-building projects. It’s a game-changer, allowing continuous, uninterrupted printing across large sites, increasing efficiency for high volume and mass production at an unmatchable scale.

 

Render of COBOD BOD3 3D Construction Printer.

The BOD3, COBOD’s third printer model, is the outstanding achievement of years of dedicated research, development, and close collaboration with customers. It is a vital advancement in automated construction technology, directly addressing the urgent global demand for faster, smarter, more efficient and sustainable building solutions. Like every COBOD 3D printer, the BOD3’s modular design offers customization, allowing it to easily adapt to any customer’s size wishes in addition to complying with the various sizes of construction sites anywhere in the world.

The BOD3 follows COBOD’s vision to build smarter through automation. Its operational stand combines the control and monitoring of both the 3D printer and supplementary equipment in one user-friendly system. The Advanced Hose Management System (AHMS) transports 3D printable material from the materials delivery system to the printhead via hoses secured within E-chains, minimizing physical labor and optimizing material flow. With the addition of the dual dosing system for additives, operators can better control the concrete and adapt it to onsite environmental conditions. By introducing additives directly at the printhead, the system reduces drying time between layers, speeding up the overall construction process. Designed for easy operation and precision, the BOD3 can be operated by a small, trained, and certified team, reducing the costs of projects.

Incorporating the innovative Universal X-Carriage, the BOD3 is ready for future COBOD advancements and technologies, like the introduction of additional tools for the printer aimed at insulating, painting, sanding, etc. This ensures long-term versatility and performance that will keep the BOD3 at the forefront of the industry for years to come.

 

Universal X-Carriage with Printhead.

Already deployed to the global market, the BOD3 is currently active in Indonesia, by Modula Tiga Dimensi, Angola, by Power2Build, and Bahrain, by Ab’aad 3D. The customers report faster project execution with near-zero downtime between individual buildings on the same site. The projects showcase the BOD3’s ability to speed up construction and print with real concrete, with 99% locally sourced materials and 1% of innovative D.fab, a co-developed solution by COBOD and Cemex to make concrete 3D printable.

Henrik Lund-Nielsen, Founder and General Manager of COBOD, commented on the BOD3: “The global housing crisis demands a more efficient construction solution that is faster, more efficient, and scalable. The BOD3 is our answer to this challenge. Drawing on years of research and expertise, we’ve designed the BOD3 with innovative features, making it our most cost-effective and efficient model yet for multiple low-rise buildings. Its design supports high-volume, linear production of houses, enabling mass production without compromising quality. The fact that six units have already been sold before its official launch speaks volumes about the BOD3’s market demand and the trust our customers place in our technology.

Michael Holm, Chief Innovation Officer at COBOD, states, “The advanced ground-based track system was developed as a response to our customers’ needs to increase efficiency and productivity. Now the 3D construction printer can be easily extended, and multiple consecutive structures can be printed with minimal repositioning and zero downtime between projects, making 3D construction printing more efficient than ever before.

 

The BOD3 is now available for purchase worldwide; for more information, please visit our website, www.cobod.com, or contact us at info@cobod.com.

 

RELEVANT LINKS

 

ABOUT COBOD

COBOD stands as the global leader in supplying 3D printers for the construction sector, with over 80 printers distributed across North and Latin America, Europe, the Middle East, Africa, and Asia-Pacific. Driven by a mission to revolutionize construction through multifunctional robots based on 3D printing, COBOD envisions automating half of the construction processes to achieve faster, cost-effective, sustainable results with enhanced design versatility.

From residential, commercial, and public buildings, COBOD’s 3D printers have been instrumental in erecting 1- to 3-story structures across all six inhabited continents. The innovative technology also extends to fabricate large-scale data centers, wind turbine towers, tanks, and more.

Embracing an open-source material approach, COBOD collaborates with global partners, including customers, academia, and suppliers. The company, backed by prominent shareholders such as General Electric, CEMEX, Holcim, and PERI, operates from its main office in Copenhagen, Denmark, and regional competence centers in Miami, Florida, and Kuala Lumpur, Malaysia. COBOD’s dynamic team comprises over 100 professionals from 25 diverse nationalities.

 

ABOUT MODULA TIGA DIMENSI

PT Modula Tiga Dimensi is a joint venture between Bakrie & Brothers (BNBR) and COBOD. BNBR focuses on offering and providing solutions for housing backlog problems currently encountered by the country.

Teaming up with COBOD International, the company is now set to adopt the latest 3D printing construction technology and is ready to offer the Indonesian market a new and better solution to housing obstructions.

 

ABOUT POWER2BUILD
Reshaping the construction sector and adapting it to urgent human needs.

Power2Build is a technology company for the construction industry, prepared to establish partnerships with private, public, and non-governmental organizations (NGOs) so that they can make the transition to Build 4.0 through 3DCP.

We offer our clients value-added services and high-quality projects, always with a multidisciplinary approach that brings together the necessary experience to deal with complex issues.

Continue Reading

Tech

Slack researcher discusses the fear, loathing and excitement surrounding AI in the workplace

Published

 on

 

SAN FRANCISCO (AP) — Artificial intelligence‘s recent rise to the forefront of business has left most office workers wondering how often they should use the technology and whether a computer will eventually replace them.

Those were among the highlights of a recent study conducted by the workplace communications platform Slack. After conducting in-depth interviews with 5,000 desktop workers, Slack concluded there are five types of AI personalities in the workplace: “The Maximalist” who regularly uses AI on their jobs; “The Underground” who covertly uses AI; “The Rebel,” who abhors AI; “The Superfan” who is excited about AI but still hasn’t used it; and “The Observer” who is taking a wait-and-see approach.

Only 50% of the respondents fell under the Maximalist or Underground categories, posing a challenge for businesses that want their workers to embrace AI technology. The Associated Press recently discussed the excitement and tension surrounding AI at work with Christina Janzer, Slack’s senior vice president of research and analytics.

Q: What do you make about the wide range of perceptions about AI at work?

A: It shows people are experiencing AI in very different ways, so they have very different emotions about it. Understanding those emotions will help understand what is going to drive usage of AI. If people are feeling guilty or nervous about it, they are not going to use it. So we have to understand where people are, then point them toward learning to value this new technology.

Q: The Maximalist and The Underground both seem to be early adopters of AI at work, but what is different about their attitudes?

A: Maximalists are all in on AI. They are getting value out of it, they are excited about it, and they are actively sharing that they are using it, which is a really big driver for usage among others.

The Underground is the one that is really interesting to me because they are using it, but they are hiding it. There are different reasons for that. They are worried they are going to be seen as incompetent. They are worried that AI is going to be seen as cheating. And so with them, we have an opportunity to provide clear guidelines to help them know that AI usage is celebrated and encouraged. But right now they don’t have guidelines from their companies and they don’t feel particularly encouraged to use it.

Overall, there is more excitement about AI than not, so I think that’s great We just need to figure out how to harness that.

Q: What about the 19% of workers who fell under the Rebel description in Slack’s study?

A: Rebels tend to be women, which is really interesting. Three out of five rebels are women, which I obviously don’t like to see. Also, rebels tend to be older. At a high level, men are adopting the technology at higher rates than women.

Q: Why do you think more women than men are resisting AI?

A: Women are more likely to see AI as a threat, more likely to worry that AI is going to take over their jobs. To me, that points to women not feeling as trusted in the workplace as men do. If you feel trusted by your manager, you are more likely to experiment with AI. Women are reluctant to adopt a technology that might be seen as a replacement for them whereas men may have more confidence that isn’t going to happen because they feel more trusted.

Q: What are some of the things employers should be doing if they want their workers to embrace AI on the job?

A: We are seeing three out of five desk workers don’t even have clear guidelines with AI, because their companies just aren’t telling them anything, so that’s a huge opportunity.

Another opportunity to encourage AI usage in the open. If we can create a culture where it’s celebrated, where people can see the way people are using it, then they can know that it’s accepted and celebrated. Then they can be inspired.

The third thing is we have to create a culture of experimentation where people feel comfortable trying it out, testing it, getting comfortable with it because a lot of people just don’t know where to start. The reality is you can start small, you don’t have to completely change your job. Having AI write an email or summarize content is a great place to start so you can start to understand what this technology can do.

Q: Do you think the fears about people losing their jobs because of AI are warranted?

A: People with AI are going to replace people without AI.

The Canadian Press. All rights reserved.

Source link

Continue Reading

Tech

Biden administration to provide $325 million for new Michigan semiconductor factory

Published

 on

 

WASHINGTON (AP) — The Biden administration said Tuesday that it would provide up to $325 million to Hemlock Semiconductor for a new factory, a move that could help give Democrats a political edge in the swing state of Michigan ahead of election day.

The funding would support 180 manufacturing jobs in Saginaw County, where Republicans and Democrats were neck-in-neck for the past two presidential elections. There would also be construction jobs tied to the factory that would produce hyper-pure polysilicon, a building block for electronics and solar panels, among other technologies.

Commerce Secretary Gina Raimondo said on a call with reporters that the funding came from the CHIPS and Science Act, which President Joe Biden signed into law in 2022. It’s part of a broader industrial strategy that the campaign of Vice President Kamala Harris, the Democratic nominee, supports, while Republican nominee Donald Trump, the former president, sees tariff hikes and income tax cuts as better to support manufacturing.

“What we’ve been able to do with the CHIPS Act is not just build a few new factories, but fundamentally revitalize the semiconductor ecosystem in our country with American workers,” Raimondo said. “All of this is because of the vision of the Biden-Harris administration.”

A senior administration official said the timing of the announcement reflected the negotiating process for reaching terms on the grant, rather than any political considerations. The official insisted on anonymity to discuss the process.

After site work, Hemlock Semiconductor plans to begin construction in 2026 and then start production in 2028, the official said.

Running in 2016, Trump narrowly won Saginaw County and Michigan as a whole. But in 2020 against Biden, both Saginaw County and Michigan flipped to the Democrats.

The Canadian Press. All rights reserved.

Source link

Continue Reading

Trending

Exit mobile version