Connect with us

Tech

iOS 14 basics: how to add widgets to your iPhone’s home screen – The Verge

Published

 on


One of the more prominent changes introduced in iOS 14, and one that is generating a lot of interest, is the addition of widgets that can be added to any page. There are all sorts of weird and useful things you can do with them (especially if you’re willing to play around with apps such as Shortcuts and Widgetsmith). To begin, here’s how to add an existing widget to your home screen:

  • Touch and hold an empty area on your screen until your apps jiggle and show minus symbols
  • Tap the plus sign in the upper-left corner, and you’ll bring up a menu of existing widgets

Touch and hold your screen and tap the plus sign.

You’ll get a selection of widgets to choose from.

  • Tap on the widget you want to add. Swipe left and right to choose the widget’s size and shape.
  • Tap “Add Widget”
  • Once you’ve added the widget, tap anywhere on the home screen to go out of edit mode

Swipe left and right to choose the size and shape you want.

Long press on a widget to remove it.

Note that the first time you tap the new widget, you may be asked to adjust its features (for example, to tell a weather widget what you want it to report).

To move the widget around the screen or to another screen, just long-press it until it starts to shake and then move it where you want it. If you want to get rid of the widget, long-press to bring up a remove option.

But wait — there’s more:

Create a widget stack

You can create a stack of widgets if you want to save space or if there’s one widget you’ll only want to use occasionally.

To create a stack:

  • Select a widget for your home screen as described above and place it where you want it. Select the next widget you want to stack (you can stack as many as 10) and save it to your home screen
  • Long press the widget so that you can move it around the screen, and place it on top of the first. Note that the widget must be the same size and shape; you can’t, say, place a small widget on a medium-sized one.

To see each widget in your stack, swipe up or down on the top widget and the next one will be revealed.

You can stack your widgets (notice the dots at the right side of the stack)

Long press on a stack to edit it.

If you want to change the position of or remove any of the apps in the stack:

  • Long press the stack and select “Edit Stack”
  • Press the three lines to the side of each app to change its position in the stack
  • To remove the app, swipe it to the left

Create a Smart Stack

Apple has also created a feature it calls a “Smart Stack,” which will automatically choose which widget should be on top depending on your location, what time it is, or what you most often look at.

iOS 14 comes with a pre-built Smart Stack made up of a group of selected apps. You add that stack the same way you’d add any widget:

  • Long press on your home screen and tap the plus icon in the upper-left corner
  • Scroll down until you see the widget called “Smart Stack”
  • As with the other widgets, scroll sideways to choose the size you want, and then tap “Add Widget”

You can stack your widgets (notice the dots at the right side of the stack)

“Smart Rotate” turns almost any stack into a Smart Stack.

Once you’ve added it, you can change the order of the included apps or remove the ones you don’t want, the same way you’d remove any stacked apps. Or if you want to start from scratch, you can create your own Smart Stack:

  • Long press any stack you’ve created and select “Edit Stack”
  • Toggle “Smart Rotate” on

Use widgets on iPads

You can also use widgets (and widget stacks) on iPads — however, they can only be placed in the Today view on the left side of the left-most screen. Otherwise, the process for adding and stacking widgets is the same as on the iPhone — as is the process for creating Smart Stacks.

If you want to keep your widgets in view no matter which screen you’re on, you can.

  • Press and hold an empty area in the Today View
  • When you see “Keep On Home Screen,” toggle it on

Meanwhile, if you want to start creating your own widgets or find out what you can do with the new App Library, check out these articles:

Let’s block ads! (Why?)



Source link

Continue Reading

Tech

iPhone 12 Lineup Enables Personal Hotspot Over Faster 5GHz Wi-Fi – MacRumors

Published

 on


As noted by MacRumors contributor Steve Moser, and confirmed by Aaron Zollo, the iPhone 12 lineup introduces support for Personal Hotspot tethering over faster 5GHz Wi-Fi, compared to 2.4GHz Wi-Fi on previous iPhones.


Personal Hotspot over 5GHz Wi-Fi is enabled by default on all iPhone 12 models. In the Settings > Personal Hotspot menu on these devices, there is a new “Maximize Compatibility” toggle that reverts Personal Hotspot to 2.4GHz Wi-Fi when enabled, with Apple noting that this may reduce internet performance on devices that are connected to the hotspot.


The combination of iPhone 12 models supporting higher-speed 5G networks and 5GHz Wi-Fi’s higher maximum throughput paves the way for faster Personal Hotspot, but testing will have to be done to confirm the exact speed improvements. Keep in mind that while 5GHz Wi-Fi is faster than 2.4GHz Wi-Fi, it has shorter range, so Personal Hotspot speeds will vary based on the distance of a tethered device to the iPhone.

Let’s block ads! (Why?)



Source link

Continue Reading

Tech

MagSafe 15W fast charging restricted to Apple 20W adapter – AppleInsider

Published

 on


New testing shows Apple’s MagSafe charging puck does peak at 15W with iPhone 12, but only when paired with the company’s 20W adapter.

The apparent restriction was discovered by Aaron Zollo of YouTube channel Zollotech. In a comprehensive evaluation of Apple’s MagSafe device posted on Monday, Zollo found two Apple adapters — a new standalone 20W USB-C device and the 18W unit that came with iPhone 11 Pro handsets — achieved high rates of charge.

Measuring energy throughput with an inline digital meter revealed MagSafe hits the advertised 15W peak charging rate (up to 16W in the video) when paired with Apple’s branded 20W adapter. Speeds drop to about 13W with the 18W adapter, and Zollo notes the system takes some time to ramp up to that level.

Older adapters and third-party models with high output ratings do not fare well in the test. Apple’s own 96W MacBook Pro USB-C adapter eked out 10W with MagSafe, matching a high seen by Anker’s PowerPort Atom PD1. Likewise, charging rates hovered between 6W and 9W when attached to Aukey’s 65W adapter, Google’s Pixel adapter and Samsung’s Note 20 Ultra adapter.

It appears third-party devices will need to adopt a MagSafe-compatible power delivery (PD) profile to ensure fast, stable energy delivery when connected to iPhone 12 series devices.

As can be expected with any charging solution, temperature plays a significant role in potential throughput. Zollo found MagSafe significantly throttles speeds as temperatures rise, meaning actual rates are not a constant 15W even when using the 20W adapter. When heat rises, energy output decreases to protect sensitive hardware components and the battery itself. In some cases, this could prompt users to remove their iPhone from its case — including Apple-branded MagSafe models — to achieve maximum thermal efficiency.

Zollo also confirms older Qi-compatible iPhone models, like iPhone 8 Plus and iPhone 11 Pro Max, charge at about 5W with MagSafe. Apple previously said Qi devices would charge at 7.5W.

Let’s block ads! (Why?)



Source link

Continue Reading

Tech

Hollywood North: B.C. film production recovers to top pre-pandemic levels – Vancouver Sun

Published

 on


Article content continued

Visual effects and animation divisions also moved to remote work setups early on and were able to continue working through the shutdown, keeping the lights on B.C.’s film sector.

While B.C.’s film industry was never subject to an official order to close by health officials, studio heads, local health authorities and unions were in communication throughout the shutdown to ensure a return to filming could be done safely.

“As a collaborative, agile and adaptable business sector, we are in the fortunate position to help restore the productivity and optimism that characterizes our region, as we navigate recovery from an extraordinary global crisis together,” said Peter Leitch, chairperson of the Motion Picture Production Industry Association of B.C. and president of North Shore Studios.

Prior to 2020’s unpredictable storyline, research conducted by the Vancouver Economic Commission also notes that B.C.’s film industry had set a new record last year, with more than $4.1 billion spent in the province (all figures in Canadian dollars).

Of that total, $3.1 billion was on physical production alone, with the remaining $1 billion on post-production and animation, much of which also takes place in Vancouver.

The $4.1 billion figure nearly triples 2012’s $1.6 billion. In the period between 2012 and 2019, film activity has translated into $22.7 billion for the provincial economy in the areas of hospitality, tourism, material suppliers, transportation and construction, including $12.5 billion alone in wages for British Columbians. It’s estimated that the film industry supports more than 70,000 jobs across B.C.

Let’s block ads! (Why?)



Source link

Continue Reading

Trending