Connect with us

Tech

OnePlus 8 Pro camera sample shows off ultrawide night photography w/ good detail – 9to5Google

Published

on


With a bigger price tag expected, one of the biggest hurdles OnePlus is set to face on the upcoming OnePlus 8 Pro is the camera quality. It’s got the hardware to do well, but how are the results? There’s not much available yet, but OnePlus CEO Pete Lau recently shared an intriguing sample.

Shared on Twitter, the first public OnePlus 8 Pro camera sample is a shot taken with the ultrawide camera in a city at night. The shot — presumably taken using OnePlus’ “Nightscape” mode — shows a city in the evening with a mostly clear sky and dozens of buildings with lights turned on at night. For just about any 2020 smartphone, this is a shot that should always look great!

In OnePlus’ case, the shot indeed does look pretty stellar. There’s plenty of detail in the shot especially towards the center. Since this is an ultrawide lens, though, there’s a bit of distortion and loss of detail off to the sides of the frame. The shots were uploaded through Twitter’s website, though, so there’s no extra compression added on.

Lau also uploaded another picture from the same location from “another flagship phone.” He doesn’t specify which other phone is being used here, but the results aren’t nearly as good. The shot overall is much darker and there’s a lot less detail in all of the buildings. Just given how good most flagships have gotten recently, though, I have a tough time believing this comparison involved something like a Galaxy S20, iPhone 11, or Huawei device.

Regardless, it’s obvious why this sample shot is so good. As was leaked recently, the OnePlus 8 Pro’s ultrawide camera is a 48MP sensor that’s almost identical to the main one, just with a wider field-of-view on the lens.

The OnePlus 8 Pro is set to debut on April 14th.

More on OnePlus:

FTC: We use income earning auto affiliate links. More.


Check out 9to5Google on YouTube for more news:

[embedded content]

Let’s block ads! (Why?)



Source link

Continue Reading

Tech

iPhone 13 design kills the notch and adds USB-C — but don't get too excited – Tom's Guide

Published

on


A iPhone 13 prototype has supposedly been leaked. But while this 5.5-inch device looks interesting, one prominent leaker has already slapped down the report’s accuracy.

The original source is MacOtakara, which published a story about some alleged iPhone 13 3D printed mockups, which allegedly shows what a 2021 iPhone could look like. It’s this story that leaker Jon Prosser responded to on Twitter with the fantastically blunt answer: “lol no.” 

MacOtakara claims that the designs for these 3D prints came from a source at online retailer Alibaba. This particular model has a 5.5-inch display, and is supposedly the successor to this year’s smallest iPhone 12 model, which measures 5.4 inches according to leaks.

The clearest change here is that there is no longer a front camera notch, which has been present from the iPhone X to the iPhone 11, and is likely coming to the iPhone 12, too. MacOtakara suggests that there will be an under-display selfie camera instead, as well as potentially a camera at the bottom of the screen.

(Image credit: MacOtakara)

We know under-display cameras are on their way, with Samsung, Oppo and Xiaomi all looking into the technology for their 2021 phones. But we’d be surprised if Apple immediately adopted this new tech as well.

If Apple was to move its cameras beneath the display, it would have to factor in how it would affect Face ID. The infrared sensor could be located in the bottom camera previously mentioned, or Apple could decide to go for an under-display fingerprint scanner like many of its rivals. But we definitely don’t see Apple abandoning Face ID.

iPhone 13 mockup

(Image credit: MacOtakara)

A shot of the mockup phone’s bottom shows that the Lightning connector has been swapped for a more standard USB-C one. This is in contradiction to other rumors that have claimed that one iPhone 13 will be Apple’s first portless phone, with the company looking to avoid using USB-C on iPhones.

The back of the phone shows a very odd camera bump with five tiny holes. MacOtakara explained that this is likely a modular system to help designers test multiple camera designs more easily. Rumors for the iPhone 13’s camera array seem to be split between whether it will have four cameras – like the iPhone 12 Pro is expected to have – or if Apple will try and add more sensors outside of the main square patch.

iPhone 13 mockup

(Image credit: MacOtakara)

MacOtakara did say that this is only a prototype model and therefore could be very different from the real iPhone 13, if it does indeed exist. However, the fact this prototype differs so widely from other leaks we’ve heard makes it hard to believe.

It’s still over a year until we’ll likely see the iPhone 13 debut in fall 2021. However the iPhone 12 is expected to be revealed around September or October this year. 

We know a lot more about the iPhone 12 than next year’s model, including its four different models, 5G connectivity, OLED displays (with 120Hz refresh rates on the Pro models), new A14 chipsets and camera arrangements – two rear cameras on the iPhone 12 and 12 Max, and four on the iPhone 12 Pro and 12 Pro Max, including a LiDAR sensor like the one seen on the iPad Pro 2020.

Let’s block ads! (Why?)



Source link

Continue Reading

Tech

Highlights of the day: YMTC said to enter SSD brand business – Digitimes

Published

on


Highlights of the day: YMTC said to enter SSD brand business

DIGITIMES staff

Friday 5 June 2020

China-based NAND flash maker YMTC reportedly is looking to cross into brand SSD business in the third quarter and will focus on supplying the devices to PC makers. Meanwhile, Apple’s new iPhones using OLED panels for 2021 may adopt LTPO backplane in order to reduce their power consumption. With Huawei under the US’ new sanctions, Taiwan’s IC substrate makers have begun turning to strife for more orders from other clients particularly those in the US.

YMTC may unveil own-brand SSDs in 3Q20: China-based Yangtze Memory Technologies (YMTC) reportedly will in third-quarter 2020 launch its own-brand SSDs adopting in-house-developed 64-layer 3D NAND flash, with target outlets including PC OEMs, according to industry sources.

OLED screens of iPhones may adopt LTPO backplanes in 2021, say sources: Apple has yet to introduce its 5G iPhones for 2020, but its supply chain is already developing OLED screens using LTPO (low temperature polycrystalline oxide) backplane technology for next year’s premium iPhone models, according industry sources.

IC substrate makers shifting focus to US clients from Huawei: Taiwan-based IC substrate makers including Unimicron Technology and Na Ya PCB are gearing up to strengthen business ties with US clients seeking to offset expected losses of orders from China’s Huawei/Hisilicon subject to tougher US trade sanctions starting September, according to industry sources.

Let’s block ads! (Why?)



Source link

Continue Reading

Tech

A two-month hunt for one pair of dumbbells. Welcome to fitness under COVID-19 – OurWindsor.ca

Published

on




A two-month hunt for one pair of dumbbells. Welcome to fitness under COVID-19 | OurWindsor.ca

Top Stories

Top Stories


Let’s block ads! (Why?)



Source link

Continue Reading

Trending