Connect with us

Science

Report says Ontario planning to open hospital dedicated to COVID-19 patients – Newstalk 610 CKTB (iHeartRadio)

Published

 on


Ontario is preparing to open its first hospital dedicated to treating COVID-19 patients. 

The Globe and Mail is reporting that Cortellucci Vaughan Hospital will open next month as COVID-19 infections continue to surge in the province. 

This hospital was scheduled to open as part of the Mackenzie Health Network and would be the first brand new hospital in the province in three decades.

With hospitals stretched to the limit, the province reportedly asked Mackenzie health about using the site for COVID-19 patients.

An unnamed official tells the Globe the hospital will initially be staffed by existing Mackenzie workers, with a plan to hire more as capacity increases.

Let’s block ads! (Why?)



Source link

Continue Reading

Science

NASA is Considering a Radio Telescope on the Far Side of the Moon – Universe Today

Published

 on


The University of Colorado Boulder and Lunar Resources Inc. have just won NASA funding to study the possibility of building a radio telescope on the far side of the Moon. The project, called FarView, would harvest building materials from the Lunar surface itself, and use robotic rovers to construct a massive, intricate network of wires and antennas across 400 square kilometers. When complete, FarView would allow radio astronomers to observe the sky in low-frequency radio wavelengths with unprecedented clarity.

Radio telescopes work best in isolation. On Earth, if radio telescope operators want to ‘hear’ the sky without interference, they need to establish enormous exclusion zones around the telescope where cellphones, wi-fi, and even the spark-plugs from gasoline cars are banned. FarView proposes to put a telescope in the quietest place we can think of, away from Earthlings and our noisy gadgets. With this Lunar observatory, astronomers would be able to listen to the Universe more clearly than ever before, allowing them to go deeper back in time and space, perhaps even to the cosmic dark ages when the first stars were forming.

The Green Bank Radio Telescope, West Virginia, requires a large ‘Quiet Zone’ surrounding it to avoid interference. Credit: Geremia, Wikipedia Commons.

It just might work, although the plan is still in the earliest stages. FarView is funded by NASA’s Innovative Advanced Concepts (NIAC) program, which works with entrepreneurs to fund ideas that are innovative and technically sound, but largely untried and still in their infancy. NIAC projects are a glimpse at the possibilities of space exploration a decade or more in the future. It will be a long road yet to create the proposed Moon-based observatory.

Dr. Alex Ignatiev, Chief Technology Officer of Lunar Resources, is confident they can pull it off, and do so without breaking the bank. “We could build FarView at about 10% of the James Webb Telescope cost and operate for more than 50 years,” he said. It is an impressive goal.

Building with Lunar Soil

The key to keeping costs down is to build FarView using materials already available on the Moon, otherwise known as in-situ resource utilization (ISRU). ISRU has become a buzzword in recent years with regard to Lunar and Martian exploration, as it is will be necessary to sustain long-duration human activity on the Moon and Mars. In this instance, ISRU will allow FarView to reduce the expensive costs of escaping Earth’s pesky gravity well by building the telescope out of Lunar regolith.

The exact manufacturing process for FarView relies on two techniques. The first is molten regolith electrolysis (melting Lunar soil to separate the metals from the oxygen), and the second is vacuum deposition (laying down thin foil-like films of material). Lunar Resources has experience in both techniques on a small scale; they will need to be ramped up to create the enormous FarView observatory.

During a Future In-Space Operations (FISO) telecon presentation last December, Ignatiev explained that the regolith across the Moon is a mix of metallic oxides, with more iron in the Mares and more aluminum in the Highlands, and elements like silicon and magnesium available throughout. “Our challenge then in terms of doing manufacturing on the moon with raw materials,” he said, “is to break that regolith-oxygen bond…and obtain the raw elements from that regolith” using electric currents.

Artist’s depiction of a rover laying down antennas on the far side of the Moon. Credit: Lunar Resources.

A small robotic processing factory would extract these metals from the soil, and deposit them into a rover. FarView’s Principal Investigator, Ronald Polidan, told FISO that as the rover drives along, it “melts the regolith surface into a glass, then lays the metal antennas on that, with connecting wires and all the other necessary infrastructure.” Using this method, it would take 26 months to fabricate the 100,000 ten-meter-long dipoles required for the telescope. The rover would only be able to work during the Lunar days (about two Earth weeks long) and have to hibernate during the nights.

Challenges and Opportunities

Building a Lunar telescope sounds complicated, but its principles are fairly straightforward once the materials are extracted. Laying strips of metal foil across the surface of the Moon shouldn’t be too hard, and no large-scale load-bearing construction is necessary for it to work. The best part is that, in theory, the metal dipoles are serviceable and repairable, giving FarView a lengthy lifespan.

To begin operations, however, some other infrastructure will probably be required first. The team plans to build solar panels and batteries from regolith as well, providing power sources for the telescope. They hope ISRU techniques like these will be tested and proven in conjunction with the Artemis program in the coming years.

Finally, for FarView to succeed, some consideration will have to be given to communications. When China landed their Chang’e 4 lander on the far side of the Moon in 2019, they first had to put a communications satellite (Queqiao) at the Earth-Moon L2 Lagrange point, to allow the lander to talk to Earth. NASA has no such satellite available yet – and cooperation with China in space has been politically difficult in recent years. A Lunar far side observatory is going to require some innovation: either in engineering, or in diplomacy.

Are Lunar Observatories the Future of Astronomy?

With new mega-constellations like Starlink coming online in the next few decades, Earth-based astronomy is becoming more and more challenging. These low-flying satellite swarms create bright streaks of light which pollute telescope imagery. Lunar observatories might seem like a promising alternative to sidestep this problem. But the fact is that for most types of telescopes, you just can’t beat the cost and convenience of building them on Earth, even if Starlink gets in their way occasionally. As such, it seems likely that Lunar observatories like FarView will only supplement Earth-based observatories, not replace them, at least not anytime soon. Not even with ISRU.

Streaks across Earth-based telescope imagery, caused by an early batch of Starlink satellites in November 2019. Image Credit: NSF’s National Optical-Infrared Astronomy Research Laboratory/CTIO/AURA/DELVE/Clara Martínez-Vázquez and Cliff Johnson.

FarView is exciting not because it solves the Starlink problem (which mostly affects optical telescopes anyways), but rather because FarView offers a unique opportunity for low-frequency radio astronomy, something not viable on Earth due to all of the radio noise we create. With FarView, we could learn things about the cosmic dark ages that just aren’t possible with Earth-based infrastructure. Its scientific value is huge. Just don’t count on it to act as a substitute for mega-constellation regulations, or streak-reducing brightness mitigation techniques. We’re still going to need those to ensure Earth-based astronomy can coexist with mega-constellations, because neither of them are going anywhere any time soon.

New ground-based telescopes like the Vera Rubin Observatory and the Extremely Large Telescope are going to do amazing things in the next decade. If and when FarView joins them, it might just ring in a new golden age of astronomy, with Earth, space, and Moon telescopes alike working together to understand our place in the Universe. It’s a goal worth pursuing, and with a little cooperation and ingenuity, it just might come sooner than we think.

Learn More:

Let’s block ads! (Why?)



Source link

Continue Reading

Science

Video "Perseverance" robot moves to the surface of Mars for the first time – SwordsToday.ie

Published

 on




The U.S. space agency “NASA” announced on Friday that the probe “Perseverance” had succeeded in traveling a few meters on Mars for the first time since it landed on the surface two weeks ago.

The six-wheeled mobile robot advanced four meters on Thursday afternoon, then turned itself to the left and then retracted about two and a half meters to check if its operating systems were working properly.

“Perseverance” was able to take pictures of its own wheels on the surface of Mars, published by NASA. The rover crossed six and a half meters in 33 minutes.

Search for clues to ancient life

“I don’t think I’ve ever been as happy as I used to be when I saw the wheel tracks,” said the engineer in charge of robot mobility at NASA’s Jet Propulsion Laboratory, which designed the vehicle. The engineer noted at a press conference that the first phase of the investigation had progressed very well, completing its mission “a very important step”.

The spacecraft can travel up to 200 meters on each Mars (slightly longer than Earth). It travels at five times the speed of any other Curiosity rover still operating on Mars.

Mobile Android “Preference” has landed The surface of Mars on February 18th The last thing on the Gizero crater that scientists believe to have been a deep lake about 3.5 billion years ago.


Thirty rock samples from the planet will be explored in two years, and another vehicle will return to Earth to find evidence of ancient life on the Red Planet.

Scientists are now observing two journeys of a mobile robot to the delta formed by an ancient river flowing into the lake, as researchers place great importance on exploring it as it is likely to contain large amounts of debris.

The first laser shot from “Supercam”

Before that, the helicopter will launch a small “ingenuity” under the vehicle, which will become the first motor vehicle to fly in the atmosphere of another planet. NASA teams are looking for the best place to conduct this historic experiment “before the end of spring,” Deputy Chief of Mission Robert Hogg promised Friday.

PrioritySo far, its cameras have captured more than 7,000 images on Earth. On February 24, NASA released a remarkable panoramic image that collected several shots taken at the landing site of the mobile robot, showing the top of the Jessero crater.

One of the photos of the vehicle shows a light brown rock. In its analysis, a scientific instrument called “Supercom” was used for the first time. NASA expects to present the results next week.

The U.S. space agency also named the landing site “Perseverance” after Octavia e-Butler, a science fiction writer born in Pasadena, California, where JPL is located.


Prone to fits of apathy. Unable to type with boxing gloves on. Internet advocate. Avid travel enthusiast. Entrepreneur. Music expert.

Let’s block ads! (Why?)



Source link

Continue Reading

Science

NASA's Perseverance Mars rover digging in with BC-made part – Chilliwack Progress – Chilliwack Progress

Published

 on


Greater Victoria’s Kennametal Inc. facility is used to making custom products for industry spanning every corner of the globe.

However, it’s the piece the plant made for a jobsite that’s currently over 200 million kilometres away that’s bringing the company an out-of-this-world amount of pride.

The site made a tungsten carbide tooth blank that’s currently mounted to a core drill on NASA’s Perseverance rover, which landed on Mars last month. The blank is involved in one of the six-wheeled rover’s key tasks; cutting chalk-sized, intact rock cores that will hopefully be sent back to Earth and give a greater understanding into ancient microbial life on Mars.

“The team is just super enthusiastic and super excited,” said Ron Sivorot, business director at the Kennametal site in the Greater Victoria suburb of Langford. “Having it in use millions of miles away is actually pretty crazy.”

But even though they’re making a component used in space exploration, nothing really changed at the Langford site. Had nobody told the plant’s employees about the company’s involvement in the mission, they might’ve never known.

“The team on the shop floor didn’t even really know that there was anything going on, that it was anything different from anything else they make,” Sivorot said. “We make millions of pieces of carbide a year and to have these ones go to Mars, it’s obviously, definitely the farthest we’ve gone.”

Excitement started to grow in 2018 after Kennametal found out the blanks —which the Langford site has been supplying to NASA’s Jet Propulsion Laboratory since 2014 —would be aboard the interplanetary mission.

“It just kind of fit right into our work flow, so to be honest, we didn’t go above and beyond, this is basically the service we’re used to giving anyway, it just fit to serve NASA and JPL,” Sivorot said.

The Langford site employees watched from their work computers as the rover touched down on the red planet. Images of NASA’s control room engineers erupting with elation upon the six-wheeled rover’s interstellar landing matched the scene at the local Kennametal site. Sivorot said some of the plant’s space-loving employees were caught geeking out with celebratory air punches as they watched the landing back here on Earth.

READ: LIVE: You can watch NASA’s Rover landing on Mars today

The k92-grade tooth blank Kennametal makes for NASA looks like a small metal cube that’s smaller than a fingernail. To make the blank, Kennametal reforms powdered tungsten carbide by pressing, shaping and centring it and giving the piece a semi-finished grind. Once NASA gets the blank, they finish grinding the piece to their specific and high-tech requirements.

The k92-grade tooth blank is also used in industries like construction, oil and gas, agriculture and forestry. The Kennametal director said tungsten carbide is used because its strength and durability can perform in hostile scenarios.

“We have a variety of other customers that use it in similar applications, other than being on another planet,” Sivorot said. “We have a lot of confidence in this grade. It’s a very tough grade, fracture resistant, wear resistant, it’s an ideal grade for this solution, so we’re confident that it’ll do what it needs to do on Mars.”

NASA says Mars was 205 million kilometres form Earth when Perseverance landed, but the rover equipped with the Kennametal product travelled 471 million kilometres in total since last summer’s launch.

“Which is super wild,” Sivorot said, “it’s actually one of those fun stories you go home and tell your kids about.”

For more news from Vancouver Island and beyond delivered daily into your inbox, please click here.


Do you have something to add to this story, or something else we should report on? Email:jake.romphf@blackpress.ca. Follow us on Instagram.

Like us on Facebook and follow us on Twitter.

LangfordVictoria

Get local stories you won’t find anywhere else right to your inbox.
Sign up here

Let’s block ads! (Why?)



Source link

Continue Reading

Trending