adplus-dvertising
Connect with us

Science

Building Earth's largest telescope on the far side of the moon – CBC.ca

Published

 on


NASA engineers are studying the feasibility of building a massive, kilometre-wide radio telescope on the moon that would dwarf anything we could build on Earth.

The telescope, which would be constructed by robots, would take the form of a huge, wire-mesh antenna in a dish shape that would hang suspended in a three-kilometre-wide crater on the far side of the moon. 

The Lunar Crater Radio Telescope would provide a unique perspective on the early universe, though it likely won’t be built for decades, according to NASA robotics engineer Saptarshi Bandyopadhyay, who is leading the project.

“We all want to know what happened. How did the universe evolve? What happened after the Big Bang?” Bandyopadhyay told Quirks & Quarks host Bob McDonald.

In the 14 billion years since that event, the light waves from that era have been stretched out from tiny fractions of a millimetre to more than 10 metres as the universe expanded. They’re now extremely long radio waves, and those can’t be seen on Earth “because the ionosphere absorbs it,” said Bandyopadhyay.

“So we want to go somewhere away from [Earth] so that we can get a picture of the Big Bang and evolution of the universe.”  

Telescope size presents challenges

The problem, however, is that in order to capture those wavelengths, not only does this telescope need to be on the moon, it needs to be very large, which makes it hard to build.

There are giant radio telescopes on Earth, which observe shorter radio wavelengths that do penetrate the atmosphere. The 300-metre-wide Arecibo telescope in Puerto Rico — recently demolished in a catastrophic accident — or the 500-metre-wide FAST telescope in China represent significant engineering challenges.

Deployment of the Lunar Crater Radio Telescope would be done by robotic rovers, that would unfold the massive aluminum-mesh antenna. (Saptarshi Bandyopadhyay)

Standalone, self-supporting, dish-shaped radio telescopes can only get to a certain size, based on the strength of the materials they’re made from and the need to resist wind loads. To avoid these issues, the largest radio telescopes are built into natural features in the terrain. Arecibo and FAST, for example, were built in natural, dish-shaped sinkholes. 

Building such a telescope on the moon is, in one sense, easier. The lower gravity on the moon means a larger structure can be built with lighter materials. No atmosphere means no windstorms or other earthly environmental risks, though there are challenges from the moon’s harsh temperatures.  

According to Bandyopadhyay, the moon also has no shortage of appropriately shaped terrain structures in the form of ubiquitous impact craters. 

“These craters seem like natural places to put this dish-shaped telescope because the crater also looks like a bowl.”  

To find a crater candidate, Bandyopadhyay and his team combed over detailed pictures taken by NASA’s Lunar Reconnaissance Orbiter and discovered more than 80,000 suitable craters on the far side of the moon.

Origami-inspired transport and construction 

While the location would provide advantages, there are unique and significant challenges to building on the moon, in particular the harsh working conditions and the difficulty of transporting materials.  

The team studied a range of scenarios for how a telescope might be constructed and transported to the moon. The one they have arrived at is inspired by Japanese paper folding, said Bandyopadhyay.

“Origami is the art of folding paper into smaller and more interesting designs. But in space, origami is extensively used to take these large structures, like a large dish of one kilometre, and we can literally fold it multiple times and make it into a pretty small structure.”

The Lunar Crater Radio Telescope would be sensitive to frequencies that are blocked by Earth’s ionosphere, and would also be shielded from radio noise from Earth broadcasts. (Saptarshi Bandyopadhyay)

The antenna would be built on Earth in the form of a large, but extremely lightweight net-like structure made of conductive aluminum wire. It would be carefully folded into a package that would fit inside the nose cone of a large rocket, possibly the Space Launch System that NASA is currently developing.

Once launched, the antenna would be carried to the moon and land on the floor of the crater into which it would be installed. Then it would need to be deployed.  

“We will have these robots that will go down … to the lander and then pull lift wires that will connect to the lander sitting at the crater floor,” Bandyopadhyay said.

These lift wires would be anchored on the crater rim and as they are winched up, the antenna would unfold and deploy. Ultimately the net-like antenna would be suspended over the crater floor, looking a little like a dish-shaped spider web.  

The tension in the wires would be adjusted to result in the appropriate dish shape to receive radio signals from space and reflect them to a receiver.

All of this technology (the launch rocket possibly excepted) is available today, said Bandyopadhyay.  

The robots, for example, are currently being tested at NASA’s Jet Propulsion Laboratory.  

“These robots are called DuAxel, and they are actively being built at JPL for over a decade now. And these robots have the speciality that they can go down almost steep terrain like just cliff faces.”

[embedded content]

For now, this is an early stage engineering feasibility study, rather than a fully developed mission proposal, but Bandyopadhyay suggests it would certainly be expensive and would be a very high-profile endeavour for NASA.  

“Cost is a big uncertainty right now. Right now, all I can say is we think this will be a flagship-class mission.”

Given that, it’s likely decades away, at least. 

“Space is hard,” said Bandyopadhyay. “I would be surprised if I could see this launched and deployed before I retired, and I’m a young scientist.”

Written and produced by Jim Lebans

Let’s block ads! (Why?)

728x90x4

Source link

Continue Reading

News

Here’s how Helene and other storms dumped a whopping 40 trillion gallons of rain on the South

Published

 on

 

More than 40 trillion gallons of rain drenched the Southeast United States in the last week from Hurricane Helene and a run-of-the-mill rainstorm that sloshed in ahead of it — an unheard of amount of water that has stunned experts.

That’s enough to fill the Dallas Cowboys’ stadium 51,000 times, or Lake Tahoe just once. If it was concentrated just on the state of North Carolina that much water would be 3.5 feet deep (more than 1 meter). It’s enough to fill more than 60 million Olympic-size swimming pools.

“That’s an astronomical amount of precipitation,” said Ed Clark, head of the National Oceanic and Atmospheric Administration’s National Water Center in Tuscaloosa, Alabama. “I have not seen something in my 25 years of working at the weather service that is this geographically large of an extent and the sheer volume of water that fell from the sky.”

The flood damage from the rain is apocalyptic, meteorologists said. More than 100 people are dead, according to officials.

Private meteorologist Ryan Maue, a former NOAA chief scientist, calculated the amount of rain, using precipitation measurements made in 2.5-mile-by-2.5 mile grids as measured by satellites and ground observations. He came up with 40 trillion gallons through Sunday for the eastern United States, with 20 trillion gallons of that hitting just Georgia, Tennessee, the Carolinas and Florida from Hurricane Helene.

Clark did the calculations independently and said the 40 trillion gallon figure (151 trillion liters) is about right and, if anything, conservative. Maue said maybe 1 to 2 trillion more gallons of rain had fallen, much if it in Virginia, since his calculations.

Clark, who spends much of his work on issues of shrinking western water supplies, said to put the amount of rain in perspective, it’s more than twice the combined amount of water stored by two key Colorado River basin reservoirs: Lake Powell and Lake Mead.

Several meteorologists said this was a combination of two, maybe three storm systems. Before Helene struck, rain had fallen heavily for days because a low pressure system had “cut off” from the jet stream — which moves weather systems along west to east — and stalled over the Southeast. That funneled plenty of warm water from the Gulf of Mexico. And a storm that fell just short of named status parked along North Carolina’s Atlantic coast, dumping as much as 20 inches of rain, said North Carolina state climatologist Kathie Dello.

Then add Helene, one of the largest storms in the last couple decades and one that held plenty of rain because it was young and moved fast before it hit the Appalachians, said University of Albany hurricane expert Kristen Corbosiero.

“It was not just a perfect storm, but it was a combination of multiple storms that that led to the enormous amount of rain,” Maue said. “That collected at high elevation, we’re talking 3,000 to 6000 feet. And when you drop trillions of gallons on a mountain, that has to go down.”

The fact that these storms hit the mountains made everything worse, and not just because of runoff. The interaction between the mountains and the storm systems wrings more moisture out of the air, Clark, Maue and Corbosiero said.

North Carolina weather officials said their top measurement total was 31.33 inches in the tiny town of Busick. Mount Mitchell also got more than 2 feet of rainfall.

Before 2017’s Hurricane Harvey, “I said to our colleagues, you know, I never thought in my career that we would measure rainfall in feet,” Clark said. “And after Harvey, Florence, the more isolated events in eastern Kentucky, portions of South Dakota. We’re seeing events year in and year out where we are measuring rainfall in feet.”

Storms are getting wetter as the climate change s, said Corbosiero and Dello. A basic law of physics says the air holds nearly 4% more moisture for every degree Fahrenheit warmer (7% for every degree Celsius) and the world has warmed more than 2 degrees (1.2 degrees Celsius) since pre-industrial times.

Corbosiero said meteorologists are vigorously debating how much of Helene is due to worsening climate change and how much is random.

For Dello, the “fingerprints of climate change” were clear.

“We’ve seen tropical storm impacts in western North Carolina. But these storms are wetter and these storms are warmer. And there would have been a time when a tropical storm would have been heading toward North Carolina and would have caused some rain and some damage, but not apocalyptic destruction. ”

___

Follow AP’s climate coverage at https://apnews.com/hub/climate

___

Follow Seth Borenstein on Twitter at @borenbears

___

Associated Press climate and environmental coverage receives support from several private foundations. See more about AP’s climate initiative here. The AP is solely responsible for all content.

Source link

Continue Reading

Science

‘Big Sam’: Paleontologists unearth giant skull of Pachyrhinosaurus in Alberta

Published

 on

 

It’s a dinosaur that roamed Alberta’s badlands more than 70 million years ago, sporting a big, bumpy, bony head the size of a baby elephant.

On Wednesday, paleontologists near Grande Prairie pulled its 272-kilogram skull from the ground.

They call it “Big Sam.”

The adult Pachyrhinosaurus is the second plant-eating dinosaur to be unearthed from a dense bonebed belonging to a herd that died together on the edge of a valley that now sits 450 kilometres northwest of Edmonton.

It didn’t die alone.

“We have hundreds of juvenile bones in the bonebed, so we know that there are many babies and some adults among all of the big adults,” Emily Bamforth, a paleontologist with the nearby Philip J. Currie Dinosaur Museum, said in an interview on the way to the dig site.

She described the horned Pachyrhinosaurus as “the smaller, older cousin of the triceratops.”

“This species of dinosaur is endemic to the Grand Prairie area, so it’s found here and nowhere else in the world. They are … kind of about the size of an Indian elephant and a rhino,” she added.

The head alone, she said, is about the size of a baby elephant.

The discovery was a long time coming.

The bonebed was first discovered by a high school teacher out for a walk about 50 years ago. It took the teacher a decade to get anyone from southern Alberta to come to take a look.

“At the time, sort of in the ’70s and ’80s, paleontology in northern Alberta was virtually unknown,” said Bamforth.

When paleontogists eventually got to the site, Bamforth said, they learned “it’s actually one of the densest dinosaur bonebeds in North America.”

“It contains about 100 to 300 bones per square metre,” she said.

Paleontologists have been at the site sporadically ever since, combing through bones belonging to turtles, dinosaurs and lizards. Sixteen years ago, they discovered a large skull of an approximately 30-year-old Pachyrhinosaurus, which is now at the museum.

About a year ago, they found the second adult: Big Sam.

Bamforth said both dinosaurs are believed to have been the elders in the herd.

“Their distinguishing feature is that, instead of having a horn on their nose like a triceratops, they had this big, bony bump called a boss. And they have big, bony bumps over their eyes as well,” she said.

“It makes them look a little strange. It’s the one dinosaur that if you find it, it’s the only possible thing it can be.”

The genders of the two adults are unknown.

Bamforth said the extraction was difficult because Big Sam was intertwined in a cluster of about 300 other bones.

The skull was found upside down, “as if the animal was lying on its back,” but was well preserved, she said.

She said the excavation process involved putting plaster on the skull and wooden planks around if for stability. From there, it was lifted out — very carefully — with a crane, and was to be shipped on a trolley to the museum for study.

“I have extracted skulls in the past. This is probably the biggest one I’ve ever done though,” said Bamforth.

“It’s pretty exciting.”

This report by The Canadian Press was first published Sept. 25, 2024.

The Canadian Press. All rights reserved.

Source link

Continue Reading

News

The ancient jar smashed by a 4-year-old is back on display at an Israeli museum after repair

Published

 on

 

TEL AVIV, Israel (AP) — A rare Bronze-Era jar accidentally smashed by a 4-year-old visiting a museum was back on display Wednesday after restoration experts were able to carefully piece the artifact back together.

Last month, a family from northern Israel was visiting the museum when their youngest son tipped over the jar, which smashed into pieces.

Alex Geller, the boy’s father, said his son — the youngest of three — is exceptionally curious, and that the moment he heard the crash, “please let that not be my child” was the first thought that raced through his head.

The jar has been on display at the Hecht Museum in Haifa for 35 years. It was one of the only containers of its size and from that period still complete when it was discovered.

The Bronze Age jar is one of many artifacts exhibited out in the open, part of the Hecht Museum’s vision of letting visitors explore history without glass barriers, said Inbal Rivlin, the director of the museum, which is associated with Haifa University in northern Israel.

It was likely used to hold wine or oil, and dates back to between 2200 and 1500 B.C.

Rivlin and the museum decided to turn the moment, which captured international attention, into a teaching moment, inviting the Geller family back for a special visit and hands-on activity to illustrate the restoration process.

Rivlin added that the incident provided a welcome distraction from the ongoing war in Gaza. “Well, he’s just a kid. So I think that somehow it touches the heart of the people in Israel and around the world,“ said Rivlin.

Roee Shafir, a restoration expert at the museum, said the repairs would be fairly simple, as the pieces were from a single, complete jar. Archaeologists often face the more daunting task of sifting through piles of shards from multiple objects and trying to piece them together.

Experts used 3D technology, hi-resolution videos, and special glue to painstakingly reconstruct the large jar.

Less than two weeks after it broke, the jar went back on display at the museum. The gluing process left small hairline cracks, and a few pieces are missing, but the jar’s impressive size remains.

The only noticeable difference in the exhibit was a new sign reading “please don’t touch.”

The Canadian Press. All rights reserved.

Source link

Continue Reading

Trending