The best way to clean a dishwasher is to clear its filter once a month, wipe the door seal, and then run an empty hot cycle with a cleaner suited to your machine. Most food smells, cloudy glasses and gritty plates trace back to a clogged filter, not a broken appliance, and the job takes about 30 minutes.
The timing is good for the holidays. Many households run the dishwasher harder in late November and December, with larger meals, more cookware and more guests. Whirlpool and KitchenAid both recommend cleaning the filter about every 30 days, and Whirlpool also recommends cleaning the interior monthly to remove detergent residue and the white etching that can show up on dishes. Canadians in hard-water areas may need to do it more often, because mineral buildup shows up faster.
Before starting, check your owner’s manual. Filter designs differ by brand, and some are called maintenance-free. Gather a soft toothbrush, a sponge or microfibre cloth, warm soapy water and white vinegar or a dishwasher cleaning tablet.
Step 1: Empty the racks and clear the drain area
Pull out both racks and remove any food from the bottom of the tub. Check the drain for debris such as bits of paper label, broken glass or seeds, and lift out what you find with a paper towel. If you rinse plates before loading, you may be hiding the problem: Whirlpool advises scraping off large food only, not pre-washing.
Step 2: Remove and wash the filter
The filter sits at the bottom of the tub, under the lower spray arm. On many Whirlpool models, you turn the upper filter assembly a quarter turn counterclockwise, lift it out and gently pull it apart. Rinse the pieces under running warm water, then use a soft toothbrush on stubborn particles or calcium deposits. Put the pieces back and lock them in place.
Some dishwashers have a maintenance-free filter. In that case, there is usually a cup that keeps objects out of the pump. Empty it when it is full, and follow your manual.
Step 3: Clean the spray arms
If your manual shows how to remove the spray arms, take them off and clean the holes with a toothbrush and soapy water. Rinse them and fit them back on firmly. If the arms are not meant to come off on your model, wipe them and clear any visible clogs in the holes.
Step 4: Scrub the door, edges and seal
Wipe the inside of the door, the edges and the control panel area with a damp sponge or microfibre cloth. Use a soft toothbrush on the rubber seal to reach the crevices, without pressing hard on the seal, as KitchenAid advises. Dry the seal afterward, since a damp seal can grow mould.
Step 5: Run a deep-clean cycle
Pick one of the following methods. Do not combine them.
- Cleaning tablet: Follow the package and your manual. KitchenAid says one tablet goes in the detergent tray of an empty dishwasher, with a second on the bottom if mineral buildup is heavy. Run a normal cycle.
- White vinegar: Put a dishwasher-safe glass holding two cups of white vinegar on the bottom rack, with no detergent, and run a full hot cycle. KitchenAid cautions that vinegar is not recommended for every dishwasher interior and is acidic, so check your use and care guide first and save it for deep cleans. A Canadian retailer, Coast Appliances, also notes that vinegar may damage rubber parts.
- Baking soda: After a vinegar cycle, sprinkle about one cup on the bottom and run a short, hot cycle, KitchenAid says.
Never use vinegar and bleach together. Coast Appliances warns against using them at the same time, and bleach is corrosive, so avoid it on stainless steel interiors and parts. Mixing chemicals is not worth the risk when a tablet or vinegar does the job.
Step 6: Wipe the exterior
Use a soft damp cloth and mild detergent on the door and handle. On stainless steel, wipe along the grain and never use abrasive products, steel wool or solvents.
Step 7: Keep it clean between deep cleans
Scrape plates instead of pre-rinsing them, and keep the rinse aid dispenser full. KitchenAid recommends a water softener if your water hardness is 15 grains or more. If the dishwasher sits unused for two or three days, a daily rinse-only cycle can help, according to KitchenAid.
If the machine still smells, leaves residue or drains slowly after a full clean, the problem may be a clogged drain hose or a failing part. Call a licensed appliance technician rather than opening up the machine’s wiring or pump yourself.
Cleaning the dishwasher is one part of a monthly kitchen routine. Our guides to how to clean a range hood filter, descale a kettle, clean a washing machine and defrost a freezer cover the rest.
If you find reporting like this useful, consider supporting Canada News Media, an independently owned Canadian newsroom.
Sources: KitchenAid Canada, Whirlpool product help, Coast Appliances.
Follow Canada News Media
Get the day's top Canadian stories and our two daily 60-second news videos wherever you scroll.
X Threads Facebook Instagram LinkedIn TikTok YouTube Pinterest Reddit Substack Flipboard Newsletter RSS













