A coolant leak from a Russian space capsule attached to the International Space Station was likely caused by a micrometeorite strike, a Russian space official said Thursday.
Russia’s space corporation Roscosmos and NASA have both said that the incident hasn’t posed any danger to the station’s crew.
Sergei Krikalev, a veteran cosmonaut who serves as the director of crewed space flight programs at Roscosmos, said the coolant leak from the Soyuz MS-22 capsule could have been caused by a meteorite striking one of its radiators.
Krikalev said in a statement that the malfunction could affect the capsule’s coolant system performance and the temperature in the equipment section of the capsule, but doesn’t endanger the crew.
The coolant leak prompted a pair of Russian cosmonauts to abort a planned spacewalk earlier in the day.
Krikalev said Russian flight controllers were continuing to assess the situation and following temperature indicators on the Soyuz, but emphasized that “there have been no other changes in parameters on the Soyuz spacecraft and the station, so there is no threat for the crew.”
Krikalev added, however, that the station’s future operations will depend on the assessment of the capsule’s condition. “Decisions about the future flight program will be made on the basis of that analysis,” he said.
“NASA and Roscosmos will continue to work together to determine the next course of action following the ongoing analysis,” NASA said. “The crew members aboard the space station are safe, and were not in any danger during the leak.”
Just as Russian cosmonauts Sergey Prokopyev and Dmitri Petelin were about to venture outside the station on a planned spacewalk earlier Thursday, ground specialists saw a stream of fluid and particles on a live video feed from space, along with a pressure drop on instruments, emanating from the Soyuz capsule.
Prokopyev, Petelin and NASA astronaut Frank Rubio used the capsule to arrive at the International Space Station in September, and it serves as a lifeboat for the crew.
Four other crew members are also currently on the space outpost — NASA astronauts Nicole Mann and Josh Cassada, Japan Aerospace Exploration Agency’s Koichi Wakata and Anna Kikina of Roscosmos.
Future Space Telescopes Could be 100 Meters Across, Constructed in Space, and Then Bent Into a Precise Shape – Universe Today
It is an exciting time for astronomers and cosmologists. Since the James Webb Space Telescope (JWST), astronomers have been treated to the most vivid and detailed images of the Universe ever taken. Webb‘s powerful infrared imagers, spectrometers, and coronographs will allow for even more in the near future, including everything from surveys of the early Universe to direct imaging studies of exoplanets. Moreover, several next-generation telescopes will become operational in the coming years with 30-meter (~98.5 feet) primary mirrors, adaptive optics, spectrometers, and coronographs.
Even with these impressive instruments, astronomers and cosmologists look forward to an era when even more sophisticated and powerful telescopes are available. For example, Zachary Cordero
of the Massachusetts Institute of Technology (MIT) recently proposed a telescope with a 100-meter (328-foot) primary mirror that would be autonomously constructed in space and bent into shape by electrostatic actuators. His proposal was one of several concepts selected this year by the NASA Innovative Advanced Concepts (NIAC) program for Phase I development.
Corder is the Boeing Career Development Professor in Aeronautics and Astronautics at MIT and a member of the Aerospace Materials and Structures Lab (AMSL) and Small Satellite Center. His research integrates his expertise in processing science, mechanics, and design to develop novel materials and structures for emerging aerospace applications. His proposal is the result of a collaboration with Prof. Jeffrey Lang (from MIT’s Electronics and the Microsystems Technology Laboratories) and a team of three students with the AMSL, including Ph.D. student Harsh Girishbhai Bhundiya.
Remove All Ads on Universe Today
Join our Patreon for as little as $3!
Get the ad-free experience for life
box-shadow: 0 0 .5rem black inset;
#go-ad-free div p
text-shadow: 2px 2px 5px rgba(0, 0, 0, 0.5);
#go-ad-free div p:first-child
@media (max-width: 940px)
#go-ad-free img, #go-ad-free div
margin: 0 auto;
Their proposed telescope addresses a key issue with space telescopes and other large payloads that are packaged for launch and then deployed in orbit. In short, size and surface precision tradeoffs limit the diameter of deployable space telescopes to the 10s of meters. Consider the recently-launched James Webb Space Telescope (JWST), the largest and most powerful telescope ever sent to space. To fit into its payload fairing (atop an Ariane 5 rocket), the telescope was designed so that it could be folded into a more compact form.
This included its primary mirror, secondary mirror, and sunshield, which all unfolded once the space telescope was in orbit. Meanwhile, the primary mirror (the most complex and powerful ever deployed) measures 6.5 meters (21 feet) in diameter. Its successor, the Large UV/Optical/IR Surveyor (LUVOIR), will have a similar folding assembly and a primary mirror measuring 8 to 15 meters (26.5 to 49 feet) in diameter – depending on the selected design (LUVOIR-A or -B). As Bhundiya explained to Universe Today via email:
“Today, most spacecraft antennas are deployed in orbit (e.g., Northrop Grumman’s Astromesh antenna) and have been optimized to achieve high performance and gain. However, they have limitations: 1) They are passive deployable systems. I.e. once you deploy them you cannot adaptively change the shape of the antenna. 2) They become difficult to slew as their size increases. 3) They exhibit a tradeoff between diameter and precision. I.e. their precision decreases as their size increases, which is a challenge for achieving astronomy and sensing applications that require both large diameters and high precision (e.g. JWST).”
While many in-space construction methods have been proposed to overcome these limitations, detailed analyses of their performance for building precision structures (like large-diameter reflectors) are lacking. For the sake of their proposal, Cordero and his colleagues conducted a quantitative, system-level comparison of materials and processes for in-space manufacturing. Ultimately, they determined that this limitation could be overcome using advanced materials and a novel in-space manufacturing method called Bend-Forming.
This technique, invented by researchers at the AMSL and described in a recent paper co-authored by Bhundiya and Cordero, relies on a combination of Computer Numerical Control (CNC) deformation processing and hierarchical high-performance materials. As Harsh explained it:
“Bend-Forming is a process for fabricating 3D wireframe structures from metal wire feedstock. It works by bending a single strand of wire at specific nodes and with specific angles, and adding joints to the nodes to make a stiff structure. So to fabricate a given structure, you convert it into bending instructions which can be implemented on a machine like a CNC wire bender to fabricate it from a single strand of feedstock. The key application of Bend-Forming is to manufacture the support structure for a large antenna on orbit. The process is well-suited for this application because it is low-power, can fabricate structures with high compaction ratios, and has essentially no size limit.”
In contrast to other in-space assembly and manufacturing approaches, Bend-Forming is low-power and is uniquely enabled by the extremely low-temperature environment of space. In addition, this technique enables smart structures that leverage multifunctional materials to achieve new combinations of size, mass, stiffness, and precision. Additionally, the resulting smart structures leverage multifunctional materials to achieve unprecedented combinations of size, mass, stiffness, and precision, breaking the design paradigms that limit conventional truss or tension-aligned space structures.
In addition to their native precision, Large Bend-Formed structures can use their electrostatic actuators to contour a reflector surface with sub-millimeter precision. This, said Harsh, will increase the precision of their fabricated antenna in orbit:
“The method of active control is called electrostatic actuation and uses forces generated by electrostatic attraction to precisely shape a metallic mesh into a curved shape which acts as the antenna reflector. We do this by applying a voltage between the mesh and a ‘command surface’ which consists of the Bend-Formed support structure and deployable electrodes. By adjusting this voltage, we can precisely shape the reflector surface and achieve a high-gain, parabolic antenna.”
Harsh and his colleagues deduce that this technique will allow for a deployable mirror measuring more than 100 meters (328 ft) in diameter that could achieve a surface precision of 100 m/m and a specific area of more than 10 m2/kg. This capability would surpass existing microwave radiometry technology and could lead to significant improvements in storm forecasts and an improved understanding of atmospheric processes like the hydrologic cycle. This would have significant implications for Earth Observation and exoplanet studies.
The team recently demonstrated a 1-meter (3.3 ft) prototype of an electrostatically-actuated reflector with a Bend-Formed support structure at the 2023 American Institute of Aeronautics and Astronautics (AIAA) SciTech Conference, which ran from January 23rd to 27th in National Harbor, Maryland. With this Phase I NIAC grant, the team plans to mature the technology with the ultimate aim of creating a microwave radiometry reflector.
Looking ahead, the team plans to investigate how Bend-Forming can be used in geostationary orbit (GEO) to create a microwave radiometry reflector with a 15km (9.3 mi) field of view, a ground resolution of 35km (21.75 mi) and a proposed frequency span of 50 to 56 GHz – the super-high and extremely-high frequent range (SHF/EHF). This will enable the telescope to retrieve temperature profiles from exoplanet atmospheres, a key characteristic allowing astrobiologists to measure habitability.
“Our goal with the NIAC now is to work towards implementing our technology of Bend-Forming and electrostatic actuation in space,” said Harsh. “We envision fabricating 100-m diameter antennas in geostationary orbit with have Bend-Formed support structure and electrostatically-actuated reflector surfaces. These antennas will enable a new generation of spacecraft with increased sensing, communication, and power capabilities.”
Further Reading: NASA
Amateur N.S. astronomer captures magic of the green comet – CBC.ca
Tim Doucette with the Deep Sky Eye Observatory in southwestern Nova Scotia has captured a dazzling time-lapse of the green comet that’s making a rare pass near Earth.
Comet C/2022 E3 (ZTF) making its closest approach to Earth on Wednesday
An amateur astronomer from southwestern Nova Scotia has captured a dazzling time-lapse of the green comet that’s making a rare pass near Earth.
The last time the comet was this close to our planet was 50,000 years ago. Many Canadians are looking up at the stars this week as the comet gets ready to make its closest approach on Wednesday.
Tim Doucette with the Deep Sky Eye Observatory near Yarmouth, N.S., is among them.
He took a two-hour time-lapse of the comet during the early-morning hours of Jan. 28.
“If you’ve got a telescope and you look closely at the comet and the background stars, it’s travelling relative in our sky about one-quarter degrees per hour,” he told CBC Radio’s Mainstreet Halifax. “So within a few minutes you can see that the comet’s actually making motion in the night sky.”
You can listen to Doucette’s full interview with host Jeff Douglas here:
Mainstreet NS8:09Astronomer Tim Doucette captures images of rare green comet
With files from CBC Radio’s Mainstreet Halifax
Kemptville author’s book being sent to the moon
An author from North Grenville, Ont., is going to be part of a small club of authors whose works will be sent to the moon.
Michael Blouin of Kemptville says he’s been interested in space travel since the Apollo 11 mission that landed humans on the moon for the first time.
To be part of a group of hundreds of authors having their work immortalized within the vast expanse of space has him “gobsmacked.”
“I take comfort in the fact that no matter what happens, it looks like my books … will survive and be there,” he said.
“I sometimes wake up at night and say ‘Oh yeah, I’m going to the moon. Wow.’ It’s kind of amazing.”
How it came to be
Blouin said he’s been a lifelong fan of NASA and space exploration, so when the opportunity to get his work in the Writers on the Moon project came up, he had to take it.
Then around the deadline to apply, his house burned down.
Amid the chaos of not having anywhere to live and then moving into his son’s house, he realized he’d missed his chance.
“I had missed the deadline to apply for this program for books to go to the moon by 12 hours and I was just kicking myself,” he said.
“I lost everything and now I’d missed out on my chance to do something I’d always dreamed about doing.”
Luckily a friend and author in Newfoundland, Carolyn R. Parsons, said she had managed to get some of her work included in the project and had enough space on her microdisk to include him as well.
When do the books go?
The NASA launch is scheduled for Feb. 25 at Cape Canaveral in Florida, which will see his book Skin House brought to the stars along with other works of independent fiction.
Blouin is getting the chance to see the launch.
“These launches sometimes get delayed due to technical reasons or due to weather,” he said.
“But I’m hoping to give myself a big enough window that I’ll actually be on site.”
Blouin had some advice for people who aspire to write or create.
“Any young person aspiring in the arts just shouldn’t give up. Keep trying,” he said. “It can be a tough go but it’s worth every moment.”
He’s getting another of his books — I am Billy the Kid — up to the moon in 2024.
India’s Adani firms lose $65bn in value – Al Jazeera English
Bobby Hull: Winnipegger and former teammate shares memories | CTV News – CTV News Winnipeg
Ford to cut prices of Mustang Mach-E, following Tesla's lead – Reuters
Silver investment demand jumped 12% in 2019
Iran anticipates renewed protests amid social media shutdown
Search for life on Mars accelerates as new bodies of water found below planet’s surface
Tech18 hours ago
New Mario Movie Trailer Reveals Seth Rogen’s DK Voice And Cat Mario
Investment21 hours ago
Did your investment portfolio take a hit in 2022? Advice on how to recover – DiscoverMooseJaw.com
News19 hours ago
Alberta Premier Danielle Smith opposes assisted-dying expansion as Ottawa eyes delay
Sports17 hours ago
What to Look for When Selecting an Online Casino
Real eState22 hours ago
8Twelve Enters into Mortgage Solution Agreement with Your Home Sold Guaranteed Realty – Financial Post
Sports23 hours ago
Maple Leafs’ Morgan Rielly calls his shot on John Tavares’ big night
Health18 hours ago
Diagnosis and acute management of migraine
Art20 hours ago
PROFILE: Christine Hager a behind-the-scenes pillar of local art