South Korea set off for the moon on Thursday. But it doesn’t want to stop there.
“We are also considering using the moon as an outpost for space exploration,” Kwon Hyun-joon, director general of space and nuclear energy at South Korea’s Ministry of Science, said in a written response to questions. “Although we hope to explore the moon itself, we also recognize its potential to act as a base for further deep space exploration such as Mars and beyond.”
In a time of both misinformation and too much information, quality journalism is more crucial than ever.
By subscribing, you can help us get the story right.
2D array of electron and nuclear spin qubits opens new frontier in quantum science – Phys.org
By using photons and electron spin qubits to control nuclear spins in a two-dimensional material, researchers at Purdue University have opened a new frontier in quantum science and technology, enabling applications like atomic-scale nuclear magnetic resonance spectroscopy, and to read and write quantum information with nuclear spins in 2D materials.
As published Monday (Aug. 15) in Nature Materials, the research team used electron spin qubits as atomic-scale sensors, and also to effect the first experimental control of nuclear spin qubits in ultrathin hexagonal boron nitride.
“This is the first work showing optical initialization and coherent control of nuclear spins in 2D materials,” said corresponding author Tongcang Li, a Purdue associate professor of physics and astronomy and electrical and computer engineering, and member of the Purdue Quantum Science and Engineering Institute.
“Now we can use light to initialize nuclear spins and with that control, we can write and read quantum information with nuclear spins in 2D materials. This method can have many different applications in quantum memory, quantum sensing, and quantum simulation.”
Quantum technology depends on the qubit, which is the quantum version of a classical computer bit. It is often built with an atom, subatomic particle, or photon instead of a silicon transistor. In an electron or nuclear spin qubit, the familiar binary “0” or “1” state of a classical computer bit is represented by spin, a property that is loosely analogous to magnetic polarity—meaning the spin is sensitive to an electromagnetic field. To perform any task, the spin must first be controlled and coherent, or durable.
The spin qubit can then be used as a sensor, probing, for example, the structure of a protein, or the temperature of a target with nanoscale resolution. Electrons trapped in the defects of 3D diamond crystals have produced imaging and sensing resolution in the 10–100 nanometer range.
But qubits embedded in single-layer, or 2D materials, can get closer to a target sample, offering even higher resolution and stronger signal. Paving the way to that goal, the first electron spin qubit in hexagonal boron nitride, which can exist in a single layer, was built in 2019 by removing a boron atom from the lattice of atoms and trapping an electron in its place. So-called boron vacancy electron spin qubits also offered a tantalizing path to controlling the nuclear spin of the nitrogen atoms surrounding each electron spin qubit in the lattice.
In this work, Li and his team established an interface between photons and nuclear spins in ultrathin hexagonal boron nitrides.
The nuclear spins can be optically initialized—set to a known spin—via the surrounding electron spin qubits. Once initialized, a radio frequency can be used to change the nuclear spin qubit, essentially “writing” information, or to measure changes in the nuclear spin qubits, or “read” information. Their method harnesses three nitrogen nuclei at a time, with more than 30 times longer coherence times than those of electron qubits at room temperature. And the 2D material can be layered directly onto another material, creating a built-in sensor.
“A 2D nuclear spin lattice will be suitable for large-scale quantum simulation,” Li said. “It can work at higher temperatures than superconducting qubits.”
To control a nuclear spin qubit, researchers began by removing a boron atom from the lattice and replacing it with an electron. The electron now sits in the center of three nitrogen atoms. At this point, each nitrogen nucleus is in a random spin state, which may be -1, 0, or +1.
Next, the electron is pumped to a spin-state of 0 with laser light, which has a negligible effect on the spin of the nitrogen nucleus.
Finally, a hyperfine interaction between the excited electron and the three surrounding nitrogen nuclei forces a change in the spin of the nucleus. When the cycle is repeated multiple times, the spin of the nucleus reaches the +1 state, where it remains regardless of repeated interactions. With all three nuclei set to the +1 state, they can be used as a trio of qubits.
At Purdue, Li was joined by Xingyu Gao, Sumukh Vaidya, Peng Ju, Boyang Jiang, Zhujing Xu, Andres E. Llacsahuanga Allcca, Kunhong Shen, Sunil A. Bhave, and Yong P. Chen, as well as collaborators Kejun Li and Yuan Ping at the University of California, Santa Cruz, and Takashi Taniguchi and Kenji Watanabe at the National Institute for Materials Science in Japan.
“Nuclear spin polarization and control in hexagonal boron nitride” is published in Nature Materials.
Tongcang Li, Nuclear spin polarization and control in hexagonal boron nitride, Nature Materials (2022). DOI: 10.1038/s41563-022-01329-8. www.nature.com/articles/s41563-022-01329-8
2D array of electron and nuclear spin qubits opens new frontier in quantum science (2022, August 15)
retrieved 16 August 2022
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.
This is when our Sun will die! Astonishing study reveals all – HT Tech
The Sun’s life may be coming to an end. Here’s this study says our Sun will die.
Those of us who have gone through a mid-life crisis know that it is a period of really big emotional turmoil. Everyone who reaches a certain age goes through it. Now, it has been revealed that not even massive celestial bodies like the Sun are safe from it. And yes, that also indicates that our Sun will die too.
A new study by the European Space Agency (ESA) has revealed that the Sun has entered its middle age, estimated to be around 4.57 billion years. It seems that the Sun is also going through a mid-life crisis with frequent Solar Flares, Coronal Mass Ejections (CMEs) and Solar Storms. The study was conducted with the help of data collected by the Gaia spacecraft.
Currently, the Sun is at the peak of its 11-year solar cycle, which has resulted in frequent solar flares, coronal mass ejections and solar storms. As the cycle ends, the frequency of these phenomena will decrease.
As the Sun gets older, the hydrogen in the Sun’s core will run out and the Sun will turn into a giant red star, lowering its surface temperature and cooling off. According to the ESA, as the Sun will reach the end of its life cycle, it will become a dim white dwarf star.
Orlagh Creevey from Observatoire de la Côte d’Azur, France searched through the data by studying some of the oldest stars in the Milky Way Galaxy with surface temperatures between 3000K and 10,000K. Orlagh said, “We wanted to have a really pure sample of stars with high precision measurements.”
The study concluded that the Sun will reach its peak temperatures nearly 8 billion years into the future after which it will lower its surface temperature and increase its size.
Orlagh said, “If we don’t understand our own Sun and there are many things we don’t know about it how can we expect to understand all of the other stars that make up our wonderful galaxy.”
NASA, on the other hand, had earlier sad in its report, “When it starts to die, the Sun will expand into a red giant star, becoming so large that it will engulf Mercury and Venus, and possibly Earth as well. Scientists predict the Sun is a little less than halfway through its lifetime and will last another 5 billion years or so before it becomes a white dwarf.”
Investigating the effect of N-doping on carbon quantum dots structure, optical properties and metal ion screening | Scientific Reports – Nature.com
Carbon quantum dots (CQDs) derived from biomass, a suggested green approach for nanomaterial synthesis, often possess poor optical properties and have low photoluminescence quantum yield (PLQY). This study employed an environmentally friendly, cost-effective, continuous hydrothermal flow synthesis (CHFS) process to synthesise efficient nitrogen-doped carbon quantum dots (N-CQDs) from biomass precursors (glucose in the presence of ammonia). The concentrations of ammonia, as nitrogen dopant precursor, were varied to optimise the optical properties of CQDs. Optimised N-CQDs showed significant enhancement in fluorescence emission properties with a PLQY of 9.6% compared to pure glucose derived-CQDs (g-CQDs) without nitrogen doping which have PLQY of less than 1%. With stability over a pH range of pH 2 to pH 11, the N-CQDs showed excellent sensitivity as a nano-sensor for the highly toxic highly-pollutant chromium (VI), where efficient photoluminescence (PL) quenching was observed. The optimised nitrogen-doping process demonstrated effective and efficient tuning of the overall electronic structure of the N-CQDs resulting in enhanced optical properties and performance as a nano-sensor.
The demand for high-performance carbon quantum dots (CQDs) with a range of applications, including sensing has been steadily increasing. However, the synthesis of CQDs continues to face challenges including high costs, lengthy multistep processes, and the use of hazardous substances1,2. Recently, biomass-derived CQDs have attracted considerable attention, and are considered as an optimal and green approach to prepare efficient CQDs. Biomass and biomass waste (agriculture product, agricultural residue, municipal solid waste etc.) are abundant, high in carbon content (45–55%), and are an environmentally friendly renewable resource3. Therefore, the utilisation of biomass as carbon resources for nanomaterial synthesis is an eco-friendly process and expected to reduce the total synthetic cost4. Although a broad range of biomass materials have been employed in producing CQDs, generally, these synthetic routes faced problems associated with poor control of the CQDs particle size, quality, and homogeneity of the product5. In addition, the CQDs synthesised from biomass or biomass waste, commonly possess poor optical properties and a low PLQY. The doping of heteroatom such as (N, P, S) is one of the most common methods to improve the optical properties of biomass-derived CQDs6,7. However, the questions related to the origin of the optical improvement with optimised dosing of these heteroatoms still need to be answered. Furthermore, in most conventional methodologies, these doping processes result in a longer synthesis time and higher energy consumption8.
In this work, the continuous hydrothermal flow synthesis (CHFS) which is primarily water-based was employed; thus, it is considered the greenest and most promising synthesis method for making CQDs. Notably, the CHFS allows designing or tailoring of the nanoparticles for specific functions based on the nucleation and surface functional processes. The comparison between CHFS and the traditional hydrothermal process revealed that the CHFS consumed less energy and time, while producing a highly homogenous quality product9. Moreover, the continuous hydrothermal process can be employed in multi-purposes such as controlling the nucleation to control the particle size and the addition of surfactant coating or dopant without further post-treatments10. In this paper, we report the use of CHFS process, to successfully synthesise N-doped carbon quantum dots (N-CQDs) from glucose which is an abundant, readily available, cost-effective biomass carbon source; and ammonia is used as a nitrogen dopant. Synthesised N-CQDs with different concentrations of ammonia were used to explore the effect of the concentration of nitrogen dopant on the optical characteristics of CQDs. A range of characterisation techniques were employed to investigate the origin of the optical enhancement. The performance of the N-CQDs as chemical nanosensor was tested. Currently clean water resources are foremost among global challenges facing society today. A significant proportion of the worlds wastewater containing heavy metals as pollutants is disposed untreated in to the environment11. Therefore, the application of the prepared N-CQDs as chemical sensor to detect chromium (VI) which is carcinogenic, hemotoxic, and genotoxic; the main source being industrial waste water, would be timely.
Glucose, ammonia (32%), potassium chromate, and potassium dichromate were purchased from Fisher Scientific. The solutions of metal ions used for the sensing application experiments were prepared using nitrate (Ag+, Ce3+, Co2+, Cr3+, Ni2+, Fe3+), sulphate (Cu2+ and Fe2+), chloride (K+, Na+, Mg2+) and sodium (CrO42−, Cr2O72−, NO3−, CH3COO−, HCOO−, SO42−, F−, Cl−, Br−, I−). These chemicals were purchased from Sigma-Aldrich and were used as received. 15 MΩ deionized H2O (ELGA Purelab) was used for all the experiments.
UV–Vis spectrophotometry: Shimadzu UV-1800 was used to perform the absorption measurements (λ = 200 to 800 nm) using a quartz cuvette (10 mm).
Photoluminescence (PL) spectroscopy: The steady-state fluorescence spectra of NCQDs were measured with Shimadzu RF-6000 spectrofluorophotometer.
High-resolution transmission electron microscopy (HRTEM): NCQDs were diluted in isopropanol and applied onto a carbon holey mesh grid (Agar) and allowed to air dry. The samples were then imaged using JEM 2100 (Jeol, Japan) at an acceleration voltage of 200 kV and at a range of magnifications between 15 and 500 K. Representatives NCQDs samples (g-CQDs, N-0.25, N-1, N-5 and N-10) were imaged and analysed.
Fourier–transform infrared (FTIR) spectra was recorded using an IR Affinity-1S Fourier transform infrared spectrometer instrument.
Raman spectra of the prepared N-CQDs was measured with a Horiba LabRAM HR Evolution spectrometer with radiation at 633 nm.
An Edinburgh Instruments FLS1000 photoluminescence spectrometer was used to measure the PL lifetime and the PLQY of the samples. The lifetime was measured using a 375 nm pulsed laser, and the data was fitted with 3-exponentials after reconvolution with instrument response function. The absolute quantum yield (QYabs) of the samples were investigated by using integrating sphere accessory with a standard method. Then, the true fluorescence quantum yield (QYtrue) is calculated by using the Eq. (1) where a is the fraction of the re-absorbed area.
X-ray photoelectron spectroscopy (XPS): an AXIS Ultra DLD (Kratos Surface Analysis) setup equipped with a 180° hemispherical analyser, using Al Kα1 (1486.74 eV) radiation produced by a mono-chromicized X-ray source at operating power of 300 W (15 kV × 20 mA), with spot size of 0.7 mm was used to record the XPS spectra. The partial charge compensation was achieved by using a flood gun operating at 1.52 A filament current, 2.73 V charge balance, and 1.02 V filament bias. The vacuum in the analysis chamber was at least 1 × 10−8 mbar.
Continuous hydrothermal flow synthesis (CHFS) was employed to synthesize N-CQDs (Supplementary Fig. 1). The process consists of three feedstock streams; (i) glucose (with a concentration of 70 mg mL−1) which was used as carbon source, (ii) ammonia with varied concentrations from 0.25 M up to 10.0 M was used as an N-dopant, and (iii) supercritical water which is the key parameter of this reaction. Firstly, the deionized water (with the flow rate 20 mL min−1) was heated up to 450 °C, and the pressure was kept at 24.8 MPa by using a back-pressure regulator (BPR) during the experiment (this condition is previously reported by our group as the optimised environment for the CQDs synthesis)10. The reaction was conducted by injecting the two precursors into the engineered mixer labelled as the “Reactor” (Fig. S1). Here, the precursors were mixed with supercritical water, and the nano dots were produced (in fraction of seconds). The residence time (~ 1.8 s) of the reaction was controlled by the flow rate of the precursors; both glucose and ammonia were pumped at the same time into the reactor with 5 mL min−1 flow rate. The reaction mixture travelled through a cooler to the BPR, and was collected for further treatments. The obtained solutions from the CHFS reaction mixtures were filtered using a 0.2 µm alumina membrane; subsequently, the solutions were continuously dialysed using a 30 kDa membrane in a tangential filtration unit. The cleaned solutions were freeze-dried, and the obtained average yield was 10.68 mg ml−1.
The CQDs samples synthesised from [glucose] = 70 mg mL−1 and ammonia with varied concentrations (0.25 M, 0.5 M, 0. 75 M, 1.0 M, 2.5 M, 5.0 M, 7.5 M and 10.0 M), were denoted as N-0.25, N-0.5, N-0.75, N-1, N-2.5, N-5, N-7.5, and N-10, respectively; g-CQDs was synthesised from the same source (glucose) but without nitrogen doping. The fluorescent photographs of the samples are shown in Fig. S2.
pH stability testing
The solutions with pH ranging from 1 to 13 were prepared using varying concentrations of NaOH (initial concentration 1.0 M) and HCl (1.0 M) solutions which were then diluted to the required pH. A dilute solution of N-CQDs (optical density, OD = 0.1) in deionised water was prepared. Following that, 100 μL of this diluted N-CQDs solution was added to a 3000 μL of each solution prepared at thedesired pH level (range 1–13). A pH meter was used to measure the corresponding pH values. The fluorescence spectra of these solutions were recorded using a Shimadzu RF-6000 Spectro fluorophotometer.
Chromium (VI) ion-sensing experiments
The detection of Cr (VI) ion experiment was conducted with various metal ions (as reported above), each prepared with a concentration of 50 ppm. In a typical experiment, 100 μL, N-CQDs (0.1 OD) was added to the 3.0 mL aqueous metal ion solution. The fluorescence spectrum of mixture solutions was measured using a Shimadzu RF-6000 Spectro fluorophotometermeas. The fluorescence lifetime was investigated to achieve a deeper understanding of the quenching mechanism using an Edinburgh Instruments FLS1000 spectrophotometer.
Limits of detection (LOD) and limits of quantification (LOQ)
The sensitivity of the N-CQDs sensor for Cr (VI) was investigated by evaluating their LOD and LOQ. For that, Cr (VI) ion solutions with various concentrations of 300 ppm, 200 ppm, 100 ppm, 50 ppm, 30 ppm, 10 ppm, 5 ppm, 2 ppm, 1 ppm and 0.5 ppm were first prepared. Then, 100 μL of N-CQDs were added to 3.0 mL of the prepared Cr (VI) ion solutions. The fluorescence spectra were recorded to estimate the LOD and LOQ by using Stem-Volmer graphs, LOD = 3σ/Ksv, LOQ = 10σ/Ksv, where Ksv is the slope of the graph, and σ is the error of the intercept.
Results and discussion
HRTEM images of N-CQDs (representative N-0.25 sample) show that the as-synthesized N-CQDs are spherical (Fig. 1a,c) with particle size ranging from 1.78 to 6.50 nm. The Gaussian distribution (Fig. 1b) of a sample of 150 particles shows the mean particle size of 4.60 ± 0.87 nm. In addition, the N-CQDs possess a crystalline structure as indicated by graphite lattice d-spacing of 0.22 nm (Fig. 1d). Similar features were also observed for the other samples g-CQDs, N-1, N-5 and N-10 analysed via TEM (Fig. S3).
To determine the nature of the functionalisation, the synthesised N-CQDs were investigated using the Fourier transform infrared (FTIR) spectroscopy. The samples were classified into two groups:(i) N-CQDs with a lower concentration of ammonia (from N-0.25 to N-1) and (ii) with a higher concentration of ammonia (from N-2.5 to N-10). The FTIR spectra (Fig. 2) showed that all N-CQDs have hydrophilic groups on their surface such as O–H (hydroxyl) corresponding to the peak at 3389 cm−1 and N–H (3263 cm−1), thus confirming their good solubility in the water. In addition, vibrations of C–H (2950 cm−1), C=O (1581 cm−1), C–N (1435 cm−1) and C–O (1080 cm−1) bonds were also observed in each sample13,14,15. The comparison of the FTIR spectra (Fig. S4) of the samples showed that increasing N-doping (ammonia concentration, from N-0.25 to N-1) displayed a diminishing stretch in vibration for C–O bond at 1080 cm−1. While the group of samples with a higher concentration of ammonia (N-2.5 to N-10) showed a sharp vibration of C–N bond at 1435 cm−1.
To achieve a deeper understanding of the surface characterisation of the N-CQDs and also to investigate the chemical composition of N-CQDs, X-ray photoelectron spectroscopy (XPS) was employed. The resultant XPS spectra shown in Fig. 3 were deconvoluted using Voigt functions (Lorentzian and Gaussian widths) with a distinct inelastic background for each component16. A minimum number of components is used to obtain a convenient fit. The binding energy scale was calibrated to the C 1s standard value of 284.6 eV. The atomic composition has been determined by using the integral areas provided by the deconvolution procedure normalized at the atomic sensitivity factor (Table S1). The XPS spectrum of the N-CQDs displays three typical peaks C1s (285.0 eV), N1s (399.0 eV), and O1s (531.0 eV). The fitted C1s spectrum was deconvoluted into four components, corresponding to carbon in form of C=C/C–C bonds (~ 284.4 eV), C–O/C–N (~ 285.8 eV), C=O (~ 287.3) and O=C–OH (~ 288.4 eV)17. Whilst, the N1s band showed three peaks after deconvolution which are 398.8 eV, 399.6 eV and 400.8 eV, representing pyridinic N, N–H and amide C–N, respectively18.
The content of each nitrogen doping species (pyridinic, pyrrolic and graphitic) are identified and quantified from the XPS spectra of NCQDs with the purpose of understanding their influence over the optical and chemical properties (Table S2). As commonly reported, the fluorescent property of CQDs can be enhanced by using nitrogen-doping. However, only the nitrogen bonded to carbon can improve the emission19. Also, a larger ratio of N/C was observed for N-CQDs samples synthesised with a higher concentration of ammonia (Table S1). The O1s region contains three peaks at 530.9 eV, 532.2 eV and 533.3 eV for C–OH/C–O–C, C=O, H–O–H, respectively20. In addition, the oxygen content is also a key parameter in the N-CQDs emission as it can maintain the balance between sp2 and sp3-carbon atoms21. Therefore, Raman spectroscopy was employed to investigate the disorder in the carbon bonding arrangement of N-CQDs.
The Raman spectra (Fig. S5) of the N-CQDs exhibited typical graphitic features consisting of the D mode (at 1368 cm−1) related to symmetry transformation by the defects, and the G band (at 1586 cm−1), which is assigned to the graphitic core sp2 (graphite-like) bonds. This is not surprising as the HRTEM images of N-CQDs showed a typical lattice spacing of graphite (see Fig. 1d). When comparing the Raman spectra between N-CQDs, at first glance, those spectra look similar, a common ratio ID/IG of 0.95 revealed a balance between the sp2 and sp3 bonds in the N-CQDs structure. This is different from g-CQDs where an ID/IG ratio of 0.83 was observed and assigned to the carbon core (sp2 bonds)10. This is probably attributed to the changes introduced by the nitrogen doping resulting in the transformation of C–C (sp2 bonds) into the sp3 bonding between N, O and C.
Optical properties of N-CQDs
The absorption spectra of the as-prepared N-CQDs measured using UV–Vis spectrophotometry are shown in Fig. 4. The N-CQDs samples have a strong peak around 265 nm and a shoulder around 295 nm (Fig. 4a). The 265 nm absorption peak is characteristics of π–π* transitions of the graphitic core (C=C or C–C) of sp2 domains present in the sp3 environment, and the 295 nm is attributed to n–π* (C=O) transitions and C–N/C=N bonds22,23. For comparison, the absorption spectrum of CQDs without nitrogen doping was also measured. It is noted that the absorption peaks related to N-CQDs are red-shifted compared to g-CQDs (synthesised from the same source glucose but without nitrogen doping), Fig. 4b. These transitions, are observed at 225 nm = π–π* (graphitic core), and 280 nm = n–π* transitions (C=O)10. Therefore, the absorption peak observed at 295 nm in the case of the N-CQDs is due to the formation of the C–N/C=N bonds related to the doping effect caused by the presence of graphitic nitrogen24,25.
The photoluminescence (PL) spectra of as-prepared N-CQDs were measured using a range of different excitation wavelengths as shown in Fig. 5. The PL emission of each sample clearly showed the excitation-dependent PL which is beneficial for a variety of applications such as biosensors, bio-images, or LED devices26,27. The PL emission peaks shifted when different excitation wavelengths were applied, and each sample exhibited an optimal excitation wavelength. Overall, the PL study revealed interesting optical properties of the N-CQDs. Firstly, the PL results are consistent with previous reports where the excitation dependent emission phenomenon of CQDs was observed28. Secondly, the maximum excitation wavelengths varied from 360 to 320 nm with the concentration of ammonia.
However, the mechanisms behind the excitation dependent properties of CQDs is not clear. One of the most comprehensive and broadly accepted mechanism in interpreting the excitation-dependent PL of the CQDs is the quantum confinement effect also known as the size effect14,21,28,29. In general, the CQDs possess broad particle size distributions which leads to a range of different energy gaps and is the reason for the variation of emission wavelengths30,31. But herein, HRTEM image data analyses confirmed that the increased amount of nitrogen doping did not contribute to an increase in the particle size for the as prepared samples. Therefore, the observed red-shift character can be ascribed to the radiative recombination of e−h pairs hosted in the sp2 clusters32. Aside from the quantum confinement effect, surface states theory is rather broadly adopted to interpret the excitation-dependent PL behaviour of CQDs33,34,35. UV–Vis absorbance showed that the peak of the N-CQDs at 265 nm is related to the π–π* transition, which suggests the existence of a large number of π-electrons. The surface electronic states can conjugate with these π-electrons as a results of the surface oxidation which result in the modification of the electronic structure of the N-CQDs34,36.
To interpret the mechanism of this effect, the PL lifetime and PLQY of N-CQDs were measured. The obtained results (Table 1) showed an increase in both PL lifetime and PLQY upon nitrogen doping and the highest values of lifetime and PLQY were obtained for (left[Nright]ge 7.5 M). The obtained PLQY value of 9.6%(pm) 0.9 for N-10 is an significant improvement compared to g-CQDs which showed PLQY of < 1%10. These results are comparable to the literature (shown in Table S3), where CQDs and N-CQDs were synthesised via different methodologies.
where (Phi) is PLQY of N-CQD and (tau _1/e) corresponds to the lifetime when fluorescence drops 1/e of its initial value.
Table 1 and Fig. 6 shows that when a higher concentration of ammonia was used, the non-radiative rates significantly reduced. This is due to surface coating activities of the nitrogen functional group which led to enhanced PLQY38. In addition, the lower non-radiative constant suggested that N-CQDs possess an efficient recombination process which led to an observation of nanosecond scale PL lifetime. These recombination processes suggested strong coupling of excited core states with the surface state. Thus confirming that the π-electron systems affect the surface electronic state leading to the modification of the overall electronic structure of N-CQDs36,39.
The stability of CQDs for a broad pH range is essential for sensing applications. Therefore, PL of the N-CQDs in pH solution was measured to establish the relationship between the pH level and the emission intensity. N-CQDs showed fluorescence stability in a broad pH range from 2 to 11. For example, the fluorescence intensity of sample N-0.25 (Fig. 7a,b) was dramatically reduced by ~ 60% at pH 1, ~ 35% at pH 12 and ~ 40% at pH 13; and there were slight decreases at pH 11 (~ 12%).
The diminishing fluorescent intensity behaviour of N-CQDs in strongly acidic and alkali media, noticeable also for samples with high content of nitrogen (for example, sample N-10, Fig. 7c,d). This can be related to protonation/deprotonation of the surface functional groups which causes surface charge disruption13. Whilst H-bonding is eliminated by deprotonation in basic conditions which can cause irregular energy levels resulting in the reduction of the N-CQDs fluorescence40. In addition, H+ can introduce surface defects on CQDs by breaking the passivated OH– shell resulting in PL decreasing and a redshifted spectrum41. Indeed, as shown in Fig. 7c, a 20 nm red shift was also noted for the N-CQD in the strong acidic condition (pH 1). We have previously assigned this to the prominent emissions deriving from the graphitic core10.
Chromium (VI) ion-sensing
The N-CQDs were investigated for ion-sensing applications for a series of cations and anions (Fig. 8 and Fig. S6) including chromium (VI) ion (CrO42−/Cr2O72−) which is a major anthropogenic pollutant in industrial wastewater and soils11. The obtained results indicated that N-CQDs are highly sensitive and showed high selectivity towards hexavalent chromium in comparison to a series of other cations and anions.
To identify the sensitivity, limits of detection (LOD) and limits of quantification (LOQ) of N-CQDs were determined by measuring the fluorescent emission quenching as a function of Cr (VI) concentration (Fig. 9a). The reduction in emission intensity with the increase in concentrations of chromium was observed (Fig. 9b) i.e. there is a correlation between them. This correlation was fitted with a linear equation (y=mx+c), where slope m gives the value of quenching constant Ksv and c is the intercept. The LOD and LOQ were determined using the following equations: LOD = 3σ/Ksv, LOQ = 10σ/Ks, respectively, where σ is the standard error of the intercept. The plotted Stern–Volmer graph for N-10 in Fig. 9b was fitted with y = 0.0238x + 0.026 (R2 = 0.9999) which gave a quenching constant value of Ksv = 0. 0238 and intercept of 0.026. The LOD of 0.955 ppm and LOQ of 3.182 ppm were obtained with a standard error of the intercept of 0.0076. The calculated LOD and LOQ for all the samples are shown in Fig. 10. Our results showed a significant improvement compared to previously reported research10 where LOD of 3.62 ppm and LOQ of 11.6 ppm) were reported for g-CQDs. In addition, the obtained results are also comparable to other reported literature (Table S4).
To understand the quenching mechanism, the change in PL lifetime of N-CQDs in various ion solutions were studied. The mechanism for this fluorescence quenching behaviour in the presence of Cr (VI) can be assigned to Inner Filter Effect (IFE) which is a physical phenomenon that occurs in a sensing system when the absorption spectrum of the absorber has an overlap with that of excitation and/or emission of the fluorescence leading to the reduced fluorescent emission intensity13. The IFE quenching is not related to the radiative and non-radiative transitions in the CQD, thus the intrinsic fluorescence emission is not changed in the presence of the quencher molecule42.
As illustrated in Fig. 10a, the N-CQDs excitation and emission bands (λex = 340 nm and λem = 420 nm) overlapped with the chromate (CrO42−) anions absorption bands at 372 nm. Moreover, CrO42− shows a second absorption band at 274 nm that also overlaps with the N-CQDs most intense absorption band at 265 nm. Further, the fluorescence lifetime of N-CQDs did not change with the addition of Cr (VI) (Fig. S7 and Table S5) which provides an evidence that the IFE is the mechanism for the fluorescence quenching phenomenon. There is a downtrend of N-CQDs in the LOD and LOQ results (Fig. 10b). The LOD decreased from 4.9 ppm for sample N-0.25 to 0.95 ppm for sample N-10, while the LOQ improved from 16.3 ppm to 3.18 ppm. These results revealed that nitrogen doping enhanced the fluorescent properties of CQDs resulting in higher PLQY which then leads to the improvement in LOD and LOQ and consequently the sensing performances.
In conclusion, efficient N-CDQs were synthesised using biomass precursors (glucose) and ammonia via the CHFS process. The synthesized N-CQDs possess excellent optical properties with a PLQY of ~ 10% and showed excellent pH stability (for pH 2 to 11). The synthesized N-CQDs were tested as a chemical sensor for Cr (VI) ion and the LOD value of 0.95 ppm and LOQ value of 3.18 nm were obtained. The fluorescence lifetime studies confirmed Inner Filter Effect (IFE) as the mechanism for the quenching behaviour of the nano-sensing. Hence, this work presented a novel, rapid, single-step and green approach for nanomaterials synthesis in general and carbon quantum dots in particular which then can be used for a range of different applications.
The datasets used and/or analysed during the current study are available from the corresponding author on reasonable request. For the purpose of open access, the authors have applied a Creative Commons attribution (CC BY) licence to any author accepted manuscript version arising.
Wang, X., Feng, Y., Dong, P. & Huang, J. A Mini review on carbon quantum dots: Preparation, properties, and electrocatalytic application. Front. Chem. 7, 1–9 (2019).
Georgakilas, V., Perman, J. A., Tucek, J. & Zboril, R. Broad family of carbon nanoallotropes: Classification, chemistry, and applications of fullerenes, carbon dots, nanotubes, graphene, nanodiamonds, and combined superstructures. Chem. Rev. 115(11), 4744–4822 (2015).
Jing, S., Zhao, Y., Sun, R. C., Zhong, L. & Peng, X. Facile and high-yield synthesis of carbon quantum dots from biomass-derived carbons at mild condition. ACS Sustain. Chem. Eng. 7(8), 7833–7843 (2019).
Zhang, S. et al. Sustainable production of value-added carbon nanomaterials from biomass pyrolysis. Nat. Sustain. 3(9), 753–760 (2020).
Kang, C., Huang, Y., Yang, H., Yan, X. F. & Chen, Z. P. A review of carbon dots produced from biomass wastes. Nanomaterials 10(11), 1–24 (2020).
Dsouza, S. D. et al. The importance of surface states in N-doped carbon quantum dots. Carbon 183, 1–11 (2021).
Kou, X., Jiang, S., Park, S. J. & Meng, L. Y. A review: Recent advances in preparations and applications of heteroatom-doped carbon quantum dots. Dalton Trans. 49, 6915–6938 (2020).
Mintz, K. J., Zhou, Y. & Leblanc, R. M. Recent development of carbon quantum dots regarding their optical properties, photoluminescence mechanism, and core structure. Nanoscale 11(11), 4634–4652 (2019).
Kellici, S. et al. Rapid synthesis of graphene quantum dots using a continuous hydrothermal flow synthesis approach. RSC Adv. 7(24), 14716–14720 (2017).
Baragau, I. A. et al. Efficient continuous hydrothermal flow synthesis of carbon quantum dots from a targeted biomass precursor for on-off metal ions nanosensing. ACS Sustain. Chem. Eng. 9(6), 2559–2569 (2021).
Azimi, A., Azari, A., Rezakazemi, M. & Ansarpour, M. Removal of heavy metals from industrial wastewaters: A review. ChemBioEng. Rev. 4(1), 37–59 (2017).
Wu, P., Li, W., Wu, Q., Liu, Y. & Liu, S. Hydrothermal synthesis of nitrogen-doped carbon quantum dots from microcrystalline cellulose for the detection of Fe3+ ions in an acidic environment. RSC Adv. 7(70), 44144–44153 (2017).
Baragau, I.-A. et al. Continuous hydrothermal flow synthesis of blue-luminescent, excitation independent nitrogen-doped carbon quantum dots as nanosensors. J. Mater. Chem. A 8(6), 3270–3279 (2020).
Ding, H., Yu, S. B., Wei, J. S. & Xiong, H. M. Full-color light-emitting carbon dots with a surface-state-controlled luminescence mechanism. ACS Nano 10(1), 484–491 (2016).
Atchudan, R., Edison, T. N. J. I., Perumal, S., ClamentSagaya Selvam, N. & Lee, Y. R. Green synthesized multiple fluorescent nitrogen-doped carbon quantum dots as an efficient label-free optical nanoprobe for in vivo live-cell imaging. J. Photochem. Photobiol. A Chem. 372, 99–107 (2019).
Major, G. H. et al. Practical guide for curve fitting in X-ray photoelectron spectroscopy. J. Vac. Sci. Technol. A. 38(6), 061203 (2020).
Ji, C., Zhou, Y., Leblanc, R. M. & Peng, Z. Recent developments of carbon dots in biosensing: A review. ACS Sensors. 5(9), 2724–2741 (2020).
Osadchii, D. Y., Olivos-Suarez, A. I., Bavykina, A. V. & Gascon, J. Revisiting nitrogen species in covalent triazine frameworks. Langmuir 33(50), 14278–14285 (2017).
Bhattacharyya, S. et al. Effect of nitrogen atom positioning on the trade-off between emissive and photocatalytic properties of carbon dots. Nat. Commun. 8(1), 1–9 (2017).
Lesiak, B. et al. C sp2/sp3 hybridisations in carbon nanomaterials—XPS and (X)AES study. Appl. Surf. Sci. 452, 223–231 (2018).
Manioudakis, J. et al. Effects of nitrogen-doping on the photophysical properties of carbon dots. J. Mater. Chem. C. 7(4), 853–862 (2019).
Carbonaro, C. et al. On the emission properties of carbon dots: Reviewing data and discussing models. J. Carbon Res. 5(4), 60 (2019).
Kellici, S. et al. Continuous hydrothermal flow synthesis of graphene quantum dots. React. Chem. Eng. 3(6), 949–958 (2018).
Sarkar, S. et al. Graphitic nitrogen doping in carbon dots causes red-shifted absorption. J. Phys. Chem. C. 120(2), 1303–1308 (2016).
Strauss, V. et al. Carbon nanodots: Toward a comprehensive understanding of their photoluminescence. J. Am. Chem. Soc. 136(49), 17308–17316 (2014).
Joshi, P., Mishra, R. & Narayan, R. J. Biosensing applications of carbon-based materials. Curr. Opin. Biomed. Eng. 18, 100274 (2021).
Roy, P., Chen, P. C., Periasamy, A. P., Chen, Y. N. & Chang, H. T. Photoluminescent carbon nanodots: Synthesis, physicochemical properties and analytical applications. Mater. Today. 18(8), 447–458 (2015).
Gan, Z., Xu, H. & Hao, Y. Mechanism for excitation-dependent photoluminescence from graphene quantum dots and other graphene oxide derivates: Consensus, debates and challenges. Nanoscale 8(15), 7794–7807 (2016).
Liu, W. et al. Graphene quantum dots-based advanced electrode materials : Design, synthesis and their applications in electrochemical energy storage and electrocatalysis. Adv. Energy Mater. 2001275, 1–49 (2020).
Sun, Y. P. et al. Quantum-sized carbon dots for bright and colorful photoluminescence. J. Am. Chem. Soc. 128(24), 7756–7757 (2006).
Wang, W. et al. Shedding light on the effective fluorophore structure of high fluorescence quantum yield carbon nanodots. RSC Adv. 7(40), 24771–24780 (2017).
Mei, Q. et al. Highly efficient photoluminescent graphene oxide with tunable surface properties. Chem. Commun. 46(39), 7319–7321 (2010).
Dong, Y. et al. Carbon-based dots co-doped with nitrogen and sulfur for high quantum yield and excitation-independent emission. Angew Chem. Int. Ed. 52(30), 7800–7804 (2013).
Bao, L., Liu, C., Zhang, Z. L. & Pang, D. W. Photoluminescence-tunable carbon nanodots: Surface-state energy-gap tuning. Adv. Mater. 27(10), 1663–1667 (2015).
Bao, L. et al. Electrochemical tuning of luminescent carbon nanodots: From preparation to luminescence mechanism. Adv. Mater. 23(48), 5801–5806 (2011).
English, D. S., Pell, L. E., Yu, Z., Barbara, P. F. & Korgel, B. A. Size tunable visible luminescence from individual organic monolayer stabilized silicon nanocrystal quantum dots. Nano Lett. 2(7), 681–685 (2002).
De Laurentis, M. & Irace, A. Optical measurement techniques of recombination lifetime based on the free carriers absorption effect. J. Solid State Phys. 6, 1–19 (2014).
Ghosh, S. et al. Photoluminescence of carbon nanodots : Dipole emission centers. Nano Lett. 14, 5656–5661 (2014).
Omary, M.A., & Patterson, H.H. Luminescence, theory. in Encyclopaedia of Spectroscopy and Spectrometry. 3rd ed. 636–653. (Elsevier Ltd., 2016).
Wang, L. et al. Rationally designed efficient dual-mode colorimetric/fluorescence sensor based on carbon dots for detection of pH and Cu2+ ions. ACS Sustain. Chem. Eng. 6(10), 12668–12674 (2018).
Kong, W. et al. Optical properties of pH-sensitive carbon-dots with different modifications. J. Lumin. 148, 238–242 (2014).
Song, Y. et al. Investigation into the fluorescence quenching behaviors and applications of carbon dots. Nanoscale 6(9), 4676–4682 (2014).
SK, MTS, KGN and IAB would like to acknowledge LSBU for all the financial support provided in the completion of this research work. IAB and AN would like to acknowledge funding through the Core Program 21N/2019 and the Project ELI_17/2020 (granted by the Institute of Atomic Physics) of the National Institute of Materials Physics.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Nguyen, K.G., Baragau, IA., Gromicova, R. et al. Investigating the effect of N-doping on carbon quantum dots structure, optical properties and metal ion screening.
Sci Rep 12, 13806 (2022). https://doi.org/10.1038/s41598-022-16893-x
Received: 11 April 2022
Accepted: 18 July 2022
Published: 15 August 2022
Airbnb almost as expensive as a hotel, figures show, as growing fees prompt user outrage – The Globe and Mail
What Does China's Dismal Economic Report Mean For Commodities – OilPrice.com
Politics Briefing: One year after Afghanistan fell to the Taliban – The Globe and Mail
Silver investment demand jumped 12% in 2019
Europe kicks off vaccination programs | All media content | DW | 27.12.2020 – Deutsche Welle
Global Media Markets, 2015-2020, 2020-2025F, 2030F – TV and Radio Broadcasting, Film and Music, Information Services, Web Content, Search Portals And Social Media, Print Media, & Cable – GlobeNewswire
News16 hours ago
William Ruto declared new Kenyan President
Health23 hours ago
Saskatchewan warns of elevated monkeypox risk through 'anonymous sexual contact' – Niagara Falls Review
Economy16 hours ago
The US economy didn't get the recession memo – CNN
Economy14 hours ago
Japan’s economy rebounds from COVID, growing 2.2 percent in Q2 – Al Jazeera English
News14 hours ago
Quebec allows copper smelter in northwest to emit arsenic levels five times norm
Art16 hours ago
How Ukrainian art has fought Russian imperialism – Ukraine Crisis Media Center
Business15 hours ago
The Next Big Thing In Entrepreneurship
Politics13 hours ago
The Case For 'Incremental' Politics In New Brunswick – Huddle Today